Multitech MT2834ZPX Guía de usuario descargar pdf (Pagina 9)

Command Function/Options

$MBn Modem (Telco Port) Baud Rate.

$MB75 CCITT V.23 mode.

$MB300 300 bps on-line.

$MB1200 1200 bps on-line.

$MB2400 2400 bps on-line.

$MB4800 4800 bps on-line.

$MB9600 9600 bps on-line.

$MB14400 14,400 bps on-line.

$MB19200 19,200 bps on-line.

$MB28800 28,800 bps on-line.

* $MB33600 33,600 bps on-line.

&M0 Asynchronous Mode.

Nd Dial stored telephone number "d" (Do not include the letter D in this command.)

NdNe Number Linking. If the first number dialed (d) is busy, another stored number (e)

may be dialed automatically

O Exit Modem Command Mode and go to Modem On-Line Mode.

P Pulse Dial. Modem will pulse dial a number entered following the P command.

&Pn Pulse Ratio.

&P0 Selects 60/40 pulse ratio.

* &P1 Selects 67/33 pulse ratio.

#Pn Parity for 11 Bit Mode.

#P0 No Parity when using 11 Bit Mode ($EB1).

#P1 Odd Parity when using 11 Bit Mode ($EB1).

#P2 Even Parity when using 11 Bit Mode ($EB1).

Qn Result Codes.

* Q0 Send Result Codes.

Q1 Suppress Result Codes (Quiet).

Q2 Dumb Answer Mode. Suppress Result Codes in Answer Mode.

&Qn Reliable, Compressed and LAP-M Result Codes.

* &Q0 Enable Reliable / Compressed / LAP-M Result Codes.

&Q1 Disable Reliable / Compressed / LAP-M Result Codes

(Standard AT Result Codes).

Rn Reverse to Answer Mode After Dialing.

* R0 Disable Reverse Mode.

R1 Enable Reverse Mode.

&Rn Clear to Send (CTS) Signal.

&R0 Normal CTS

* &R1 Forces CTS on in Modem Command Mode.

&R2 CTS forced ON until disconnect. Follows Register S24.

3-5

SRM-100 - AT Command Reference Guide; Multi-Tech Format AT Command Set

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Multitech MT2834ZPX Guía de usuario Pagina 9