Multitech MT2834ZPX Guía de usuario descargar pdf (Pagina 6)

Command Function/Options

Bn CCITT Mode / Bell Mode

* B0 V.21 for 300 bps operation (CCITT Mode).

B1 300 bps operation (Bell Mode).

$BAn Speed Conversion

* $BA0 Enable Speed Conversion (Baud Adjust Off).

$BA1 Disable Speed Conversion (Baud Adjust On).

&Cn Data Carrier Detect (DCD) Signal.

&C0 Forced DCD signal ON.

* &C1 Normal DCD operation (required by most software).

&C2 DCD drops upon disconnect (follows Register S24).

&C4 Reset modem when DCD drops.

&CDn Cleardown on Disconnect.

* &CD0 Execute cleardown on disconnect.

&CD1 Do not execute cleardown on disconnect.

Ds Dial Command. Dial the telephone number "s", where s may include up to 60 characters

or T, P, R, comma and ; characters.

DsNd Store Telephone Number, where "s" is the phone number and "d" is the desired

directory number.

&Dn Data Terminal Ready (DTR) signal.

&D0 Ignore DTR.

&D1 Modem returns to command mode.

* &D2 Normal DTR.

&D3 DTR drop causes modem to reset to default parameters.

$Dn Data Terminal Ready (DTR) Dialing.

* $D0 Disable DTR Dialing.

$D1 Enable DTR Dialing.

%DFn V.34 Line Probe Data Format.

* %DF0 V.34 Line Probe Data in Graph Format.

%DF1 V.34 Line Probe Data in Table Format.

%DPn Read Line Probe Information.

* %DP0 Do not read Line Probe Information from DSP during handshaking.

%DP1 Read Line Probe Information from DSP during handshaking.

>DTn Detect DTMF tones.

* >DT0 Disable modem detecting of DTMF tones.

>DT1 Enable modem detecting and reporting of DTMF tones

when off-hook.

En Set Modem Command Mode Echo.

E0 Disable echoing of command mode characters.

* E1 Enable echoing of command mode characters.

3-2

SRM-100 - AT Command Reference Guide; Multi-Tech Format AT Command Set

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Sin comentarios

Multitech MT2834ZPX Guía de usuario Pagina 6