Multitech MTC-C2 Guía de usuario descargar pdf (Pagina 28)

CONFIGURING AND COMMUNICATING WITH YOUR DEVICE

Enter:

AT#FTPPUT="file.txt"

The device responds with:

CONNECT

7. Send the file through the device.

Closing the FTP Data Connection

When you finish sending the file:

1. Enter the escape sequence.

Enter:

+++

The device responds with:

NO CARRIER

2. Close the FTP connection.

Enter:

AT#FTPCLOSE

3. Close the PPP data connection.

Enter:

AT#SGACT=1,0

The device responds with OK.

Downloading File from FTP Server

To connect to an FTP server and download files:

1. Check signal strength.

Enter:

AT+CSQ

2. Activate context one

Enter:

AT#SGACT=1,1

3. Set FTP operations timeout to 10 seconds

Enter:

AT#FTPTO=1000

4. Configure FTP server IP address with username and password.

Enter:

AT#FTPOPEN="###.##.###.#","username","password",0 where ###.##.###.# is the IP address and the

username and password for the FTP server.

5. Configure file transfer type.

Enter:

AT#FTPTYPE=# where # is 0 for binary or 1 for ASCII.

6. If required, change the working directory to "folder1".

Enter:

28 MultiConnect

Cell User Guide

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Multitech MTC-C2 Guía de usuario Pagina 28