Multitech CDMA Especificaciones descargar pdf (Pagina 21)

Chapter 6 – Global Configuration Commands

Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide 21

Restore Factory Settings &F

Description: This command is used to restore the factory settings from NV memory. This is a standard Hayes®

modem AT command.

See Appendix "Effects of AT&W, ATZ and AT&F

Note: There is a remote chance of NV memory corruption if a reset or power loss

occurs during the processing of this command. Only use this command during

the initial setup of the operating characteristics.

Syntax: AT&F

Command

Possible Responses

AT&F

Note: Command valid, modem resets

Save Configuration &W

Description: This command writes the current configuration to NV. See table in Chapter 20 for a list of items.

This is a standard Hayes® modem AT command.

Syntax: AT&W

Command

Possible Responses

AT&W

Note: Command valid

Reset to Default Configuration Z0

Description: This command is used to restore the configuration last saved by AT&W.

Syntax: ATZ0

Command

Possible Responses

ATZ0

Note: reset to default

configuration.

Note: Command is valid

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 128 129

Sin comentarios

Multitech CDMA Especificaciones Pagina 21