Multitech CDMA Especificaciones descargar pdf (Pagina 65)

Chapter 12 – OTASP/OTAPA Indications

Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide 65

OTASP Over the Air Service Programming gives a wireless carrier the ability to provision new services

over the network, rather than requiring the customers to bring the terminal device into a store

for programming. For example, an automatic update in internal software parameters PRL can be

performed.

OTAPA Over the Air Parameter Administration gives a wireless carrier the ability to automatically

update internal software parameters by means of a specially defined CDMA data call that is

mobile terminated (MT).

The unsolicited indications outlined in this chapter may appear during OTASP / OTAPA. If they do not appear

issue command AT+WUSLMSK=00040000 to enable the responses.

Initial Programming Required +WOT0

Description: This Over-The-Air Service Provisioning (OTASP) response indicates that initial device

programming is required.

Response

Syntax: +WOT0: “Initial programming required!”

Possible Responses

+WOT0: “Initial programming required!”

Programming In Progress +WOT1

Description: This Over-The-Air Service Provisioning (OTASP) response indicates that device programming is in

progress.

Response

Syntax: +WOT1: “Programming in progress”

Possible Responses

+WOT1: “Programming in progress”

Programming Successful +WOT2

Description: This Over-The-Air Service Provisioning (OTASP) response indicates that device programming has

been completed successfully.

Response

Syntax: +WOT2: “Programming Successful”

Possible Responses

+WOT2: “Programming Successful”

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 128 129

Sin comentarios

Multitech CDMA Especificaciones Pagina 65