Multitech MMCModem GPRS (MTMMC-G) Manual de usuario descargar pdf (Pagina 10)

Chapter 2 – General Configuration AT Commands

Multi-Tech Systems, Inc. IP Connectivity AT Commands for GPRS-F4 Wireless Modems (PN S000437C) 10

Bearers Handling +WIPBR

Description: The +WIPBR command can be used to:

• Select the bearer

• Start/close the bearer

• Configure different bearer options such as access point name

Description Notes:

• The SIM card must be inserted in order to use this command.

• This command can be used even if the PIN 1/CHV 1 is not entered.

• This command can be used even if the PIN 2/CHV 2 is not entered.

Syntax: For <cmdtype>, see Parameters/Defined Values below.

If <cmdtype>=0,1 or 5 AT+WIPBR=<cmdtype>,<bid>

If <cmdtype>=2 AT+WIPBR=<cmdtype>,<bid>,<opt num>,<value>

If <cmdtype>=3 AT+WIPBR=<cmdtype>,<bid>,<opt num>

If <cmdtype>=4 AT+WIPBR=<cmdtype>,<bid>,<mode>[,<login>,

<password>,[<caller identity>]]

If <cmdtype>=6 AT+WIPBR=<cmdtype>,<bid>,<mode>

Read Command: AT+WIPBR? Reads current values.

Test Command: AT+WIPBR=? Lists available values.

Unsolicited Response: If <mode>=1 +WIPBR: <bid>,<status>,<local IP @>,<remote IP

@>,<DNS1 @>, <DNS2 @>

Parameters/

Defined Values: <cmd type> Type of Command

0 close bearer

1 open bearer

2 set value of different bearer options

3 get value of different bearer options

4 start bearer

5 stop bearer

6 bearer configuration management

<bid> Bearer Identifier

1 UART1

2 UART2

3 N/A

4 N/A

5 GSM

6 GPRS

11..14 CMUX port over UART1

21..24 CMUX port over UART2

<opt num> Bearer Option Identifier

0 WIP_BOPT_LOGIN

username (string)

max: 64 characters

1 WIP_BOPT_PASSWORD

password (string)

max: 64 characters

2 WIP_BOPT_DIAL_PHONENB

phone number (string)

max: 32 characters

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comentarios a estos manuales

Sin comentarios

Multitech MMCModem GPRS (MTMMC-G) Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MMCModem GPRS (MTMMC-G)