Multitech MMCModem GPRS (MTMMC-G) Manual de usuario descargar pdf (Pagina 43)

Appendix A – GSM/GPRS +WIND Command

Multi-Tech Systems, Inc. IP Connectivity AT Commands for GPRS-F4 Wireless Modems (PN S000437C) 43

Command syntax: AT+WIND= <IndLevel >

Command Possible Responses

AT+WIND? +WIND: 0

AT+WIND=255 OK

Note: The SIM has been removed. +WIND: 0

Note :The SIM presence pin has been detected as “SIM

removed”

Note: The SIM has been inserted. +WIND: 1

Note :The SIM presence pin has been detected as “SIM

inserted”

Note: The network service is available

for an emergency call

+WIND: 7

Note: The initialization has been

completed

+WIND: 4

Note: The modem received a NITZ

information message

+WIND: 15,1,"Cingular Extended",2,"Cingular",3,"+08",

4,"03/14/27,16:59:48+08",5,"123456",6,"2"

Additional Notes:

• The AT+WIND? command is supported and indicates the <allowed bit flows>.

• AT+WIND settings are automatically stored in non volatile memory (EEPROM). This

means the &W command does not need to be used and the selected flows are always

activated after boot.

• Default value is 0: no flow activated, no indication.

• AT+WIND=? gives the possible value range (0-4095)

• The unsolicited response will then be:

+WIND: <event> [,<idx>]

<idx>: Call identifier, defined in +CLCC command.

• Or for event 10:

+WIND: <event>,<phonebook>,<status>,…,<phonebook>,<status>

• Or for event 11:

+WIND: <event>,[“<checksum of SM>”],[“<checksum of FD>”],[“<checksum of

ON>”],[“<checksum of SN>”] ,[“<checksum of EN>”],[“<checksum of LD>”]

• Or for event 15 (NITZ indication):

+WIND: <event>[,1,"Full name>"][,2,"<Short name>"][,3,"<Local time

zone>"][,4,"<Universal time and local time zone>"][,5,"<LSA identity>"][,6,"<Daylight

Saving Time>"]

1 2 ... 38 39 40 41 42 43 44

Sin comentarios

Multitech MMCModem GPRS (MTMMC-G) Manual de usuario Pagina 43