
Chapter 2 – General Configuration AT Commands
Multi-Tech Systems, Inc. IP Connectivity AT Commands for GPRS-F4 Wireless Modems (PN S000437C) 7
Chapter 2 – General Configuration AT
Commands
IP Stack Handling +WIPCFG
Description: The +WIPCFG command is used for performing the following operations:
• Starts TCP/IP stack
• Stops TCP/IP stack
• Configures TCP/IP stack
• Displays version information
Description Notes:
• This command can be used even if the SIM card is absent.
• The +WIND indication from which this command is allowed is 3, which
provides information about the SIM presence after a software reset and also
indicates whether the SIM is inserted or removed. See Appendix A –
GSM/GPRS +WIND AT Command.
Syntax: For <mode>, see Parameter/Defined Values below.
If <mode>=0, 1 AT+WIPCFG=<mode>
If <mode>=2 AT+WIPCFG=<mode>,<opt num>,<value>
If <mode>=3 AT+WIPCFG=<mode>
If <mode>=4 AT+WIPCFG=<mode>,<action>
Read Syntax: AT+WIPCFG? Displays the current <optnum> and <value>
Test Syntax: AT+WIPCFG=? Displays OK
Parameters/Defined Values:
<mode> Requested Operation
0 stop TCP/IP stack
1 start TCP/IP stack
2 configure TCP/IP stack
3 display TCP/IP application version
4 TCP/IP stack configuration management
<opt num> Configuration Option Identifier
0 WIP_NET_OPT_IP_TTL
Default TTL of outgoing data grams
Range: 0-255 (default value: 64)
1 WIP_NET_OPT_IP_TOS
Default TOS of outgoing parameters
Range: 0-255 (default value: 0)
2 WIP_NET_OPT_IP_FRAG_TIMEO
Time to live in seconds of incomplete fragments
Range: 1-65535 (default value: 60)
3 WIP_NET_OPT_TCP_MAXINITWIN
Number of segments of initial TCP window
Range: 0-65535 (default value: 0)
4 WIP_NET_OPT_TCP_MIN_MSS
Default MSS of off-link connections
Range: 536-1460 (default value: 536)
5 WIP_NET_OPT_DEBUG_PORT
Range: 0-3 (default value: 0)
Comentarios a estos manuales