
Chapter 3 – IP Protocol Services
Multi-Tech Systems, Inc. IP Connectivity AT Commands for GPRS-F4 Wireless Modems (PN S000437C) 17
Service Creation +WIPCREATE Continued
Parameters/Defined Values:
<mode>: Specifies Type of Socket
1 UDP
2 TCP Client
3 TCP Server
4 FTP
<index>: TCP/UDP/FTP Connection Identifier
<local port>: Local TCP/UDP Port
<peer IP>: Peer IP Address; A String Between Quotes
Indicating an address either in numeric form (e.g. “85.12.133.10”) or as a
DNS entry (e.g. “www.wavecom.com”)
<peer port>: Peer TTCP/UDP Port in Socket Service or the Server Port in FTP
Service
Range: 1-65535 (Default Value: 21)
<from idx>: Minimum Index for Spawned TCP Sockets
Range: 1-8
<server index>: TCP Server Socket Identifier
<to idx>: Maximum Index for Spawned TCP Sockets
Range: 1-8
<communication index>: Indexes Reserved for Spawned Sockets
It cannot be used by other sockets even if the spawned sockets are not
created yet.
<server>: Address of the FTP Server
It can either be a 32 bit number in dotted-decimal notation
(“xxx.xxx.xxx.xxx”) or an alpha numeric string format for hostname.
<user name>: Login of the User
String
<password>: Password of the User
String
<account>: Account Information of the User
This is required by some ftp server during authentication phases.
String
Parameter Storage: None
Possible Errors:
+CMEE” AT error code Description
3 operation not allowed
800 invalid option
803 operation not allowed in the current WIP stack state
830 bad index
832 bad port number
834 not implemented
836 memory allocation error
837 bad protocol
839 error during channel creation
840 FTP session is already active
842 destination host unreachable (whether host unreachable,
Network unreachable, response timeout)
Comentarios a estos manuales