Multitech MT5634ZBAV Guía de usuario descargar pdf (Pagina 108)

User Guide

Command: #S

Enter Setup Password

Values:

= password (1–8 characters, case sensitive)

Default: MTSMODEM

Description: Enters the password used for callback security

and remote configuration setup. This command

allows the use of all callback security commands.

Command: #S=

Store Setup Password

Values:

= password (1–8 characters, case sensitive)

Default: MTSMODEM

Description: Stores a new password for callback security and

remote configuration setup.

Command: &V Display Current Settings

Values: n/a

Description: Displays the modem’s active settings, including

the telephone numbers stored in nonvolatile

memory and the security settings, if enabled. If

the setup password has been entered, the pass-

words are also displayed.

Command: &Zy=[

][

]

[,???] Store Dialing Command

Values:

= 0–29 (callback security enabled)

x = Dialing command string

Default: None

Description: Stores dialing command

in memory location

The command string must begin with AT and can

have up to 35 characters. The telephone number

in the command must be preceded by D, DT, or

DP. Example: AT&Z0=+-ATM0D5551212,???.

During a call, if the + or - character is not entered

after the password, the modem will call back the

stored number. This command can be entered

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 169 170

Sin comentarios

Multitech MT5634ZBAV Guía de usuario Pagina 108