Multitech MT5634ZBAV Guía de usuario descargar pdf (Pagina 69)

4 AT Commands, S-Registers, and Result Codes

Command: &V Display Current Settings

Values: n/a

Description: Displays the active modem settings, including the

callback security settings if callback security is

enabled. If the setup password has been entered, it

also displays the callback security passwords.

Command: &W

Store Current Configuration

Values:

= 0

Default: None

Description: &W0 Stores current modem settings in nonvolatile

memory and causes them to be loaded at power-

on or following the ATZ command instead of the

factory defaults. See also the

command.

&W1 Clears user default settings from nonvolatile

memory and causes the factory defaults to be

loaded at power-on or following the ATZ com-

mand.

Command: &Y

Select Stored Configuration for Hard Reset

Values:

= 0

Default: 0

Description: &Y0 Select stored configuration 0 on power-up. (For

backward compatibility with some software.)

&Y1 Not supported—responds

ERROR

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 169 170

Sin comentarios

Multitech MT5634ZBAV Guía de usuario Pagina 69