Multitech MTS2WFA-R Manual de usuario descargar pdf (Pagina 12)

Chapter 3 – WLAN Commands

Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D) 12

#WLANIBSSCHANNEL – Channel for Ad-Hoc Mode

Description: Sets channel for Ad-Hoc mode.

Syntax: Set Value: AT#WLANIBSSCHANNEL=<value>

View Value: AT#WLANIBSSCHANNEL?

Values: 1 – 14

Default Value: 9

#WLAN? – WLAN Module

Description: Displays WLAN module-related information.

Syntax: View Values: AT#WLAN?

Values: SECURITYMODE SSID

NETWORKMODE IBSSCHANNEL

COUNTRYCODE DATARATE

SCANMODE WLANENABLE

TXPOWER(dBm) MACADDR

Default Value: None

#WLANSETTXPOWER – Transmit Power

Description: Sets transmit power of the WLAN radio.

Syntax: Set Value: AT#WLANSETTXPOWER=<value in dBm>

Values: Any value from 0 to 16 dBm

Default Value: 15 dBm

#WLANCONNECT – Connect with AP

Description: Connects the module with AP.

Syntax: Set Value: AT#WLANCONNECT

Values: None

#WLANDISCONNECT – Disconnect with AP

Description: Disconnects the module with AP.

Syntax: Set Value: AT#WLANDISCONNECT

Values: None

#WLANENABLE – Auto Connect Module with AP

Description: On power up, this parameter determines whether to connect to the AP automatically or

manually. Connection to the AP can be established by AT#WLANCONNECT command.

A value of 0 means the module will not connect to AP automatically. A value of 1 means

that on power up the module tries to connect to the AP for configured settings.

Syntax: Set Value: AT#WLANENABLE=<value>

View Value: AT#WLANENABLE?

Values: 0: Manual connection to the AP

1: Automatic connection to the AP

Default Value: 0

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Sin comentarios

Multitech MTS2WFA-R Manual de usuario Pagina 12