Multitech MTS2WFA-R Manual de usuario descargar pdf (Pagina 34)

Chapter 9 – Miscellaneous Commands

Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D) 34

Chapter 9 – Miscellaneous

Commands

#VVERSION – Software Version

Description: This command directs the TCP/IP stack to display the software version.

Syntax: Set Value: AT#VVERSION

Values: No TCP/IP parameters

Default Value: None

#VSTATE – Display the Current Status of the Device

Description: This command directs the TCP/IP stack to display the current status of the device.

Syntax: Set Value: AT#VSTATE

Values: No TCP/IP parameters

Default Value: None

#VALL – Display All AT Parameters

Description: This command directs the TCP/IP stack to display all AT# parameters. The parameters

are displayed by blocks of categories separated by a <CR><LF> sequence, all at the

same time.

Syntax: Set Value: AT#VALL

Values: Read parameters. All parameters.

Default Value: None

&F – Restore Default Factory Settings

Description: This command restores the default factory settings value for the whole IP module.

Syntax: Set Value: AT&F

Values: No parameter values.

Default Value: None

A/ – Previous Command

Description: This command executes the previous command.

Syntax: A/

Values: No parameter values.

Default Value: None

1 2 ... 29 30 31 32 33 34 35 36 37 38

Sin comentarios

Multitech MTS2WFA-R Manual de usuario Pagina 34