Multitech MTS2WFA-R Manual de usuario descargar pdf (Pagina 31)

Chapter 7 – FTP Commands

Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D) 31

#FTPCSTART – FTP Interactive Mode

Description: The module will go into interactive mode. It will ask for all the configuration parameters

first.

Syntax: Set Value: AT#FTPCSTART

Values: FTP Port number:

FTP mode: (0: active, 1: passive)

FTP type: (binary)

Default Value: None

#FTPVERBOSE – Verbose Mode

Description: This command enables or disables server responses.

Syntax: Set Value: AT#FTPVERBOSE=<Value>

View Value: AT#FTPVERBOSE?

Values: 0: Disable

1: Enable

Default: 1: Enable

#FTP? – FTP Module

Description: This command directs the TCP/IP stack to display all AT# parameters for the FTP client

configuration.

Syntax: View Value: AT#FTP?

Values: FTPSERV

FTPPORT

FTPUN

FTPPW

FTPGETFILENAME

FTPFILESIZE

FTPPUTFILENAME

FTPDIR

FTPTYPE

FTPMODE

Default Value: None

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Sin comentarios

Multitech MTS2WFA-R Manual de usuario Pagina 31