Multitech ISI608PC El manual del propietario descargar pdf (Pagina 16)

ISI608PC Owner’s Manual

Table 2-2 (cont’d)

Step Procedure

5 Install the ISI608 card(s) into the selected expansion

slot(s) in the same manner as any other add-on card,

as instructed in your computer’s documentation.

6 Fasten the retaining bracket to the computer chassis

and replace the cover.

7 Attach the octopus cable to the DB78S female

connector on the ISI608 card at the back of your

computer. The RS232 ports provided by the octopus

cable are for connection to modems, multiplexers or

other devices. If the other device is a local terminal

port, then a crossover cable is required (not included)

between the octopus cable and the terminal port. See

Appendix D for schematic of a crossover cable.

NOTE

Any cables connected to the computer must be

shielded to reduce interference.

Figure 2-4. Octopus Cable

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 80 81

Sin comentarios

Multitech ISI608PC El manual del propietario Pagina 16