Multitech ISI608PC El manual del propietario descargar pdf (Pagina 41)

3 - ISI608 Driver Installation

Multi_Setup Utility

This section guides you through the Multi-Tech Setup Utility for

SCO and UNIXWare systems. The Multi_Setup utility lets you

set various parameters for Multi-Tech's ISI card ports; such

as, transparent printing options, high baud settings (above

38400 bps), and hardware flow control. All the changes made

by the Multi_Setup utility are in effect until the system is

rebooted or until the option is changed using Multi_Setup.

Multi_Setup has a database of “on” and “off” strings for the

transparent printing option through commonly-used terminal

emulations. If terminal type in use is not recognized by

Multi_Setup, Multi_Setup checks the

termcap

database to

extract the “po” and “pf” escape sequences for transparent

printing through that terminal type.

Multi_Setup options are provided in Table 3-10.

Table 3-10. Multi_Setup Options

Command-line

Options Feature

-h Prints the Help file.

-a Displays current setting for printer

configuration options.

-c cps Specifies the printer speed in characters

per second. Default value of 100 cps.

-b bufsize Specifies the buffer size for transparent

printing. Valid range is any integer greater

than 0, as specified by your printer. The

default value is 250 characters.

-T term Sets the transparent printing escape

sequences to that of the terminal specified

by term. This parameter has access to

the look-up table in the terminal database

built into Multi_Setup. If the terminal is not

recognized by Multi_Setup, then the

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 80 81

Sin comentarios

Multitech ISI608PC El manual del propietario Pagina 41