Multitech MR9600-100 Guía de usuario descargar pdf (Pagina 40)

MultiCommManager User Guide

32

clicking the Configuration Manager button on the right side of the Manager toolbar.) Create only

one configuration file for each type of configuration that you need. The configuration type could be

based on the type of modem, the type of host to which the modem is connected, the firmware level

that the modem is running, or other considerations. Do not create one configuration file per

modem.

Configuration files should include only commands that are different from the factory default

settings of the modem. Items that should be considered when creating modem configuration files

are the serial speed at which the host expects to talk to the modem, the types of error correction

and data compression that are desired, and the RS-232 signaling requirements that your host

device has.

See also:

“How to Assign Configuration Files to Modems” on page 32.

How to Select Modems

Modems can be selected in different ways depending on which window is active. For the Explorer

window, when an item is selected, everything underneath it in the hierarchy is also selected. For

instance, if you select an IP site, then all the modems at that IP site are selected; if you select a

modem group, then all modems in the group are selected; etc. In the rack display window, a

modem can be selected by clicking the button associated with the modem (A–H). In the modem

status window, the modem that is shown is automatically selected.

How to Assign Configuration Files to Modems

1. In the Manager module, select the modems to which you wish to assign a configuration file.

2. Click Setup|Modem|Configuration File.

3. In the dialog box that appears, select a previously created configuration file.

See also:

“How to Select Modems” on page 32.

How to Set Modem General Setup Settings for Modems

Note: Does not apply to CommPlete Communications Server sites.

1. In the Manager module, select the modems whose Modem General Setup information you

want to set.

2. Click Setup|Modem|General.

3. In the Modem General Setup dialog box, select the options you want.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 85 86

Comentarios a estos manuales

Sin comentarios