Multitech BL-Series Manual de usuario descargar pdf (Pagina 13)

AT Commands for the MT5656ZDX, MT5600ZDX, MT5600BA/BL-Series Modems

Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)

Command: &Yn Select Profile for Hard Reset

Values: n = 0 or 1

Default: None

Description: &Y0 Select profile 0 to be loaded on power-up.

&Y1 Select profile 1 to be loaded on power-up.

Note: See also the &W and Z commands.

Command: &Zn=x Store Telephone Number

Values: n = 0–3 (with callback security disabled - MT5600BA/BL only) 0-29 (with callback security

enabled - MT5600BA/BL only)

x = Stored telephone number

Default: None

Description: Stores telephone dial string x in memory location. Dial the stored number using the ATDS=n

command.

Note: See also the #CBSn command. For callback security options, see Chapter 6.

MT5600BA LCD:

Command: %Cn Data Compression Control

Values: n = 0, 1, 2, or 3

Default: 3

Description: Enables or disables data compression negotiation. The modem can only perform data

compression on an error-corrected link.

%C0 Disables data compression.

%C1 Enables MNP 5 data compression negotiation.

%C2 Enables V.42bis data compression negotiation.

%C3 Enables both V.42bis and MNP 5 data compression negotiation.

Note: This command controls both V.42bis and MNP-5 data compression, whereas the

&E14 and &E15 commands control only V.42bis data compression. The command in effect

is the one last entered.

Command: %En Line Quality Monitor

Values: n = 0, 1, or 2

Default: 2

Description: Controls whether or not the modem will automatically monitor the line quality and request a

retrain (%E1) or fall back to a lower speed when line quality is insufficient and fall forward to

a faster speed when line quality is sufficient (%E2).

%E0 Disable line quality monitor and auto-retrain.

%E1 Enable line quality monitor and auto-retrain.

%E2 Enable line quality monitor and fallback/fall forward.

Command: %L Line Signal Level

Values: None

Default: None

Description: %L Returns a value that indicates the received signal level in dBm. This value is a direct

indication (DAA-dependent) of the receive level at the MDP, not at the telephone line

connector. Examples: 009 = -9 dBm, 043 = -43 dBm, and so on.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Comentarios a estos manuales

Sin comentarios

Multitech BL-Series Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech BL-Series