Multitech BL-Series Manual de usuario Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
Voice Commands for the MT5656ZDXV and MT5600ZDXV Modems
42
Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)
Command: +VPR= Select DTE/Modem Interface Rate (Turn Off Autobaud)
Description: This command selects the DTE/modem interface rate.
Syntax: +VPR=<rate>
Defined Values: <rate>> Decimal number corresponding to the DTE/modem interface rate where 0 =
autobaud rate determined by processing the AT command, and 1,2,3,4,8,16,24,48,96
correspond to multipliers of 2400 bps to determine the actual rate:
0 = Autobaud
1 = 2400 bps
2 = 4800 bps
3 = 7200 bps
4 = 9600 bps
8 = 19200 bps
16 = 38400 bps
24 = 57600 bps
48 = 115200 bps
96 = 230400 bps
Reporting Current or Selected Values:
Command: +VPR?
Response: <rate>
Example: 0 For the default setting (Autobaud).
Reporting Supported Range of Parameter Values:
Command: +VPR=?
Response: (<rate> range)
Example: (0,1,2,3,4,8,16,24,48,96)
Result Codes: OK <rate> = 0,1,2,3,4,8,16,24,48,96.
ERROR Otherwise, or if not in Voice Mode.
Speakerphone Commands
Command: +VSP= Speakerphone ON/OFF
Description: This command turns the speakerphone ON or OFF
Syntax: +VSP=<mode>
Defined Values: <mode> Decimal number corresponding to the selected option.
0 The speakerphone function is OFF. (Default.)
1 The speakerphone function is ON.
Reporting Current or Selected Values:
Command: +VSP?
Response: <mode>
Example: 0 For the default setting.
Reporting Supported Range of Parameter Values:
Command: +VSP=?
Response: (<mode> range)
Example: (0,1)
Result Codes: OK <mode> = 0 or 1.
ERROR Otherwise, or if not in Voice Mode.
Command: +VDX= Speakerphone Duplex Mode
Description: This command selects speakerphone full duplex mode.
Syntax: +VDX=<mode>
Defined Values: <mode> Decimal number corresponding to the selected option.
1 The speakerphone mode is full duplex.
Reporting Current or Selected Values:
Command: +VDX?
Response: <mode>
Example: 1 For the default setting.
Reporting Supported Range of Parameter Values:
Command: +VDX=?
Response: (<mode> range)
Example: (1)
Result Codes: OK <mode> = 1.
ERROR Otherwise, or if not in Voice Mode.
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Comentarios a estos manuales

Sin comentarios