Multitech BL-Series Manual de usuario descargar pdf (Pagina 43)

Voice Commands for the MT5656ZDXV and MT5600ZDXV Modems

Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)

Unsolicited Voice Mode Result Codes

The unsolicited result codes for voice mode differs from standard modem Command mode result codes. The +V

specification refers to these voice mode result codes as "event detection reports". Event detection reports are provid-

ed in simple report format when one character is enough to report an event, such as RING. A complex report format is

used when one character is not enough to report an event; generally, all multi-character responses.

Complex event reports are in the format <tag> <=> <data> <cr>, where <tag> is the data type, = is the ASCII = sign,

<data> is a specific data instance, and <cr> is ASCII 13 decimal. The table below defines the complex event report

tags.

Valid Complex Event Report Tags

Tag Description

TIME Caller ID Tag in the form TIME=HHMM, where HH is the hour (00-23) and MM is the minute

(00-59). All numbers are in ASCII and numbers less than 10 have a leading 0.

DATE The current date in the format MMDD (where MM is the month 0-12 nad DD is the day

01-31). All numbers are in ASCII and numbers less than 10 have a leading 0.

NMBR The caller's telephone number, in the format NMBR=<Number> or P or O (ASCII 4F hex).

The P indicates the caller's information is unavailable (Private). The O indicates the caller's

information is unavailable (Outside area code).

NAME The caller's name in the format NAME=<Listing Name>.

MESG Indicates a data item not listed above in Multiple Message Format:

MESG=<Data Tag><Length of Message><Data><Checksum> in printable ASCII (to avoid

confusion with binary output).

ERRM Error Tag (used for Caller ID and other uses). Refer to the +VCID comand.

DRON Distinctive Ring Cadence On time.

DROF Distinctive Ring Cadence Off time.

CPON Control Tone Cadence On time.

CPOF Control Tone Cadence Off time.

CWON Call Waiting Cadence On time.

CWOF Call Waiting Cadence Off time.

ASTB See Table 4.

NDID DID Services. Refer to the +VDID comand.

SITT The data value for the SITT tag, in the format <SITT><=><data><cr>, where <data> means:

ICNT Intercept Tone

VCCT Vacant Code Tone

REOT Reorder Tone

NCDT No Circuit Detected Tone

TON4 Fourth SIT Tone Number

TON5 Fifth SIT Tone Number

TON6 Sixth SIT Tone Number

TON7 Seventh SIT Tone Number

In the event of an unrecognized data tag, the MultiModem presents the data item information as printable hex ASCII

numbers following the MESG tag. For example:

RING

DATE=0321

TIME-1405

NMBR=5045551234

NAME-DOE JOE

MESG=060342424231

RING

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Comentarios a estos manuales

Sin comentarios

Multitech BL-Series Manual de usuario Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech BL-Series