Multitech BL-Series Manual de usuario descargar pdf (Pagina 7)

AT Commands for the MT5656ZDX, MT5600ZDX, MT5600BA/BL-Series Modems

Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)

Command: On Return Online to Data Mode

Values: 0 or 1

Default: None

Description: O0 Exit online command mode and return to online data mode without a retrain.

Normally used after a +++ escape (see +++ escape sequence).

O1 Exit online command mode and return to online data mode after a retrain.

Command: P Pulse Dialing

Values: P, T

Default: T

Description: Forces pulse (non-touch-tone) dialing until a T command or T dial modifier is received.

MT5600BA LCD:

Command: Qn Result Codes Enable/Disable

Values: n = 0 or 1

Default: 0

Description: Q0 Enable result codes.

Q1 Disable result codes

MT5600BA LCD:

Command: Sr Select Register

Values: r = S-register number

Default: None

Description: Selects register Sr as the last register accessed. E.g., S0. The command AT? can then be

used to read the register, and the command AT=n can then be used to set the register to

value n.

Command: Sr=n Set Register Value

Values: r = S-register number; n varies

Default: None

Description: Sets value of register Sr to n, where n is entered in decimal format. E.g., S0=1. If the

short form AT=n is used, the value is written to the last accessed S-register.

MT5600BA LCD:

Command: Sr? Read Register Value

Values: r = S-register number

Default: None

Description: Reads value of register Sr and display it in 3-digit decimal format. E.g., S2? gives the

response 043. If the short form AT? is used, the last accessed S-register is read.

MT5600BA LCD:

Command: T Tone Dialing

Values: P, T

Default: T

Description: Forces DTMF (touch-tone) dialing until a P command or P dial modifier is received.

MT5600BA LCD:

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Sin comentarios

Multitech BL-Series Manual de usuario Pagina 7