Multitech BL-Series Manual de usuario descargar pdf (Pagina 20)

AT Commands for the MT5656ZDX, MT5600ZDX, MT5600BA/BL-Series Modems

Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)

Command: +PQC=n Quick Connect Control

Values: n = 0, 1, 2, or 3

Default: 3

Description: Controls the V.92 shortened Phase 1 and Phase 2 startup procedures (Quick Connect).

When line conditions are stable, quick connect results in shortened connect times;

however, significant fluctuation in line conditions from call to call can result in longer connect

times, in which case it may be advisable to disable quick connect.

+PQC=0 Enables Short Phase 1 and Short Phase 2 (Quick Connect)

+PQC=1 Enables Short Phase 1

+PQC=2 Enables Short Phase 2

+PQC=3 Disables Short Phase 1 and Short Phase 2

+PQC=? Displays the allowed values

+PQC? Displays the currrent value

Caller ID Commands (V.92)

Command: +VCID=n Caller ID Selection

Values: n = 0, 1, or 2

Default: 0

Description: Enables Caller ID detection and configures the reporting and presentation of the Caller ID

data that is detected after the first ring. The reported data includes the date and time of the

call, the caller's name and number, and a message. Set S0=2.

See the MT5600BA/BL–V.90 Section for the V.90 Caller ID Selection command.

+VCID=0 Disables Caller ID

+VCID=1 Enables Caller ID with formatted data

+VCID=2 Enables Caller ID with unformatted data

+VCID=? Displays the allowed values

+VCID? Displays the currrent value

Command: +VRID= Caller ID Report Retrieved

Values: 0, 1

Default: 0

Description: This command reports the data associated with the Caller ID services in the Incoming Call

Line ID (ICLID) data format for the last received call.

+VRID=0 Reports Caller ID with formatted presentation to the DTE. Data includes date,

time, name, and telephone number.

+VRID=1 Reports Caller ID with unformatted presentation to the DTE.

+VRID=? Displays the supported range of parameter values.

+VRID Displays Caller ID information of the last call received.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Sin comentarios

Multitech BL-Series Manual de usuario Pagina 20