Multitech RF560VPN Manual de usuario descargar pdf (Pagina 27)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – Setup Examples 27

2. At the Site B workstation connected to a LAN port of the RF550VPN/RF560VPN:

At the DOS prompt PING a workstation connected to the LAN port of the RF550VPN/RF560VPN

at Site A.

Example: PING 192.168.2.100 <return>

You should see four successful packet transmit/receive statements. If you do not, try several

more times. You may see several initial failures while the two RouteFinders make a secure

connection.

If this fails, try to PING the WAN port of the RF550VPN/RF560VPN at Site A.

Example: PING 204.26.122.103

You should see four successful packet transmit/receive statements. If you do not, try several

more times. You may see several initial failures while the two RouteFinders make a secure

connection.

If this fails, try to PING the WAN port of the RF550VPN/RF560VPN at Site B.

Example: PING 204.26.122.3

Note: If any of these tests fail then verify that the workstation is connected to a LAN port of the

RF550VPN/RF560VPN. The LAN port LINK LED should be on and the ACT LED should blink on

each time you PING the RF550VPN/RF560VPN. Verify the WAN port at each Site is connected

properly. Also verify that the RF550VPN/RF560VPN is configured properly.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 58 59

Sin comentarios

Multitech RF560VPN Manual de usuario Pagina 27