Multitech RF560VPN Manual de usuario descargar pdf (Pagina 34)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – Setup Examples 34

The VPN Settings screen for entering specific VPN settings will display. The Connection Name

(SiteAtoB) defaults into the first field. Continue to enter the following settings:

a) Select Disable UID and leave Local IPSec Identifier and Remote IPSec Identifier blank.

b) Do not check Enabled Keep Alive.

c) Do not check Enabled NetBIOS Broadcast.

d) Remote Site – Select LAN.

e) Remote IP Network – Enter the Remote IP Network address (LAN) for Site B. (Ex:

192.168.10.0)

f) Remote IP Netmask – Enter the Remote IP Netmask address for Site B. (Ex: 255.255.255.0)

g) Remote Gateway IP – Enter the Remote Gateway IP address (WAN) for Site B. Since Site B

will use dynamic IP addressing, set this value to 0.0.0.0.

h) Network Interface – Select the Network Interface from the drop-down list box. (Ex: WAN

Ethernet)

i) Secure Association – Select IKE to set how inbound packets will be filtered. IKE is the

default. IKE primarily encompasses router key exchange and the negotiation of security policy.

Selecting IKE displays the following fields.

Note: Since this example is assuming the RF550VPN/RF560VPN at Site B is using a dynamic

IP address, the Secure Association must be set to IKE. Selecting Manual mode for the

Secure Association requires a valid Address to be entered for the Remote Gateway IP.

0.0.0.0 is not a valid IP address.

j) Perfect Forward Secure – Check the Enabled button.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 58 59

Sin comentarios

Multitech RF560VPN Manual de usuario Pagina 34