Multitech RF560VPN Manual de usuario descargar pdf (Pagina 47)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – Setup Examples 47

Example 4: RF550VPN/RF560VPN Configuration Procedure at Site A

Note: Configure the RF550VPN/RF560VPN at Site A same as was explained in the

RF550VPN/RF560VPN-to-RF550VPN/RF560VPN Example 1, with the exception of the following

changes:

For ISP Settings, under SETUP WIZARD, check the box Your ISP requires you to input IP

settings and enter the following information.

IP Assigned by your ISP: This is the IP address of the WAN port on the RF550VPN/RF560VPN.

(Ex: 204.26.122.103)

IP Subnet Mask: This is the IP address of the subnet mask for the WAN port on the

RF550VPN/RF560VPN.

(Ex: 255.255.255.0)

ISP Gateway Address: This is the IP address of the ISP gateway. For this example connecting

the client to the RouteFinder using a cross-over cable, you can use the IP address of the SSH

Sentinel client. (Ex: 204.26.122.50)

Click the Next button.

Note: For this scenario it is not necessary to enter any information for the ISP Additional Settings or

Modem Settings.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 58 59

Sin comentarios

Multitech RF560VPN Manual de usuario Pagina 47