Multitech RF560VPN Manual de usuario descargar pdf (Pagina 45)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – Setup Examples 45

l) Key Life – Enter the amount of time for the router to renegotiate the Key. (Ex: 3600 seconds =

60 minutes.

m) IKE Life Time – Enter the amount of time that tells the router to renegotiate the IKE security

association. For example, 28800 seconds is 8 hours.

Once the VPN settings are entered, click on the Save button, the Connection Name will display on the

lower half of the screen and on the initial VPN Settings screen. You can enable/disable, edit, or delete

this connection by clicking the corresponding buttons. To enable this connection, check the

Enable

box that appears to the left of the connection name.

Note: If you uncheck the Enable box, the parameters will remain in the table for you to enable/disable,

edit, or delete at any time.

After you have finished making all the changes on the various pages, click Save and Restart to save

the settings and restart the device. After the restart, the device will function according to the saved

settings.

8. During the save and restart process, system messages will let you know that you have successfully

configured the settings for the device and saved the settings. You will see a status bar across the

bottom of your browser showing the progress of the startup process. The RouteFinder home page will

be loaded automatically after restart is completed.

This completes the configuration of the RF550VPN/RF560VPN at Site B.

Testing Your Configuration

1. Follow the same procedure as in example 1 using the PING command to test your configuration.

Since the RF550VPN/RF560VPN is using a dynamic IP at Site B, it will be necessary to initiate a

successful PING from Site B to A before PINGing from Site A to B.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 58 59

Sin comentarios

Multitech RF560VPN Manual de usuario Pagina 45