Multitech RF560VPN Manual de usuario descargar pdf (Pagina 36)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – Setup Examples 36

Example 2: Configuration Procedure at Site B

Note: To configure the RF550VPN/RF560VPN at Site B follow the same procedure as in example 1, but

change the following item in the RF550VPN/RF560VPN configuration:

For ISP Settings, select Static IP Settings.

Note: To test this example with two RF550VPN/RF560VPNs back-to-back without the Internet, this

box needs to be checked and the following information needs to be entered.

a) IP Assigned by your ISP: This is the IP address of the WAN port on the RF550VPN/RF560VPN

at Site B.

(Ex: 204.26.122.3)

b) IP Subnet Mask: This is the IP address of the subnet mask for the WAN port on the

RF550VPN/RF560VPN at Site B. (Ex: 255.255.255.0)

c) IP Gateway Address: This is the IP address of the WAN port on the RF550VPN/RF560VPN at

Site A.

(Ex: 204.26.122.103)

Click the Next button.

Testing Your Configuration

Follow the same procedure as in example 1 using the PING command to test your configuration. Since

the RF550VPN/RF560VPN is using a dynamic IP at Site B, it will be necessary to initiate a successful

PING from Site B to A before PINGing from Site A to B.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Sin comentarios

Multitech RF560VPN Manual de usuario Pagina 36