Multitech MTA128NT Manual de usuario descargar pdf (Pagina 4)

ID and Keywords Symptom: Workaround

063030s

…The calling number is not available even for an emergency (911) call.

On the trunk group form, set the field Send Calling

Number to Yes.

Emergency, PRI,

Trunk, Display,

Appliance, Endpoint,

Telephone

IF:

- On the ars analysis form, the call type is set to 'alrt', and

- On the trunk group form for a PRI trunk group, the field Send Calling

Number is set to No...

THEN:

062964s

…The endpoint continues to hear the announcement even while on hold.

Turn on Direct IP.

Hold, H.323 IP,

Announcement,

Media Gateway,

Direct IP-IP (Shuffling)

IF:

- Direct IP-IP (shuffling) is turned off, and

- An IP endpoint makes a call and starts to hear an announcement (or

any other automated signal, such as intercept tone), and

- The call receives VoIP from a media gateway, and

- The endpoint puts the call on hold...

THEN:

062707s

…Some IP endpoints cannot get dialtone or receive calls.

Busy and release the affected C-LAN.

H.323 IP, Tone,

Blocked/Dropped Call

IF:

- A reset system 1 occurs while IP endpoints are recovering and re-

registering...

THEN:

062678s

…The first call has no talkpath.

Turn on Direct IP.

H.323 IP, Hold,

Talkpath,

Blocked/Dropped

Call, Direct IP-IP

(Shuffling)

IF:

- Direct IP-IP (shuffling) is turned off, and

- An IP endpoint calls a DCP endpoint, and

- The IP endpoint puts the first call on hold and calls another DCP

endpoint, and

- The IP endpoint attempts to return to the first call...

THEN:

062632s

…You receive the message Error Encountered; Cannot Complete

When you run the command 'add ip-interface', be

careful to complete the form.

Administration, Circuit

Pack, VAL,

Translation

Corruption, Port

Network,

Translations, VAL

(Voice Announcement

over the LAN)

IF:

- You run the command 'add ip-interface' for a TN2501 (VAL: Voice

Announcement over the LAN Manager) or TN799 (C-LAN) circuit pack,

and

- You do not add a data module and enable the Ethernet port, and

- The port network containing the circuit pack restarts, and

- You run the command 'change ip-interface'...

THEN:

062412s

…The last digit of your number is not visible on the attendant's display.

Punctuate the display of the calling party number to

avoid a string that is 8, 11, 12, or 13 characters

long. For instance, remove punctuation for a 7-

digit number, and add punctuation to an 8-digit

number.

Display, Endpoint /

Appliance /

Telephone, Attendant

IF:

- You call the individual extension for an attendant, and

- Your number appears on the attendant's endpoint as a string that is 8,

11, 12, or 13 characters long...

THEN:

062327s

…The error message says Source Board Has Filesystem Running, rather

than notifying you that you must disable file transfer before the command

can be effective.

Disable file transfer before running this command.

TN Circuit Pack, File

Transfer, Maintenance

IF:

- Your configuration contains a TN2602 circuit pack, and

- Secure file transfer (SFTP) is already enabled, and

- You run the command 'enable filexfer' for that circuit pack…

THEN:

061912s

...The field Backup Cluster Automatic Takeover appears on the form,

Disregard the field.

Administration,

Backup/Restore, File

Transfer, Maintenance

IF:

- You are working with the system-parameters customer-option form…

THEN:

061671s

…You see the correct results, but the screen inaccurately references a

TN2602.

Disregard the inaccurate TN number.

Maintenance, TN

Circuit Pack

IF:

- You run the command 'status media-processor board' for a TN2302

circuit pack…

THEN:

Page 4 of 9Avaya Communication Manager, Release 3.1

Known Issues and Workarounds for the S8400 Media Server

1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios

Multitech MTA128NT Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MTA128NT