Multitech CDMA Guía de usuario descargar pdf (Pagina 23)

Chapter 3 – ! Prefix Commands

CDMA 1xEV-D0 AT Commands Reference Guide (Document S000482B) 23

!SESSIONSTATUS Current Session Status

Syntax: AT!SESSIONSTATUS=<lower_byte>,<upper_byte>

Description: !SESSIONSTATUS (Sets the current Session Status)

!SESSIONSTATUS? (Reads the current Session Status)

Value Meaning

0 Inactive—there is no session

1 Default—there is a session, but no negotiation has been completed

2 Active—there is a session, and all parameters have had at least one chance

to be negotiated

In testing and debugging procedures, it is useful to force the session status to Inactive, so

that Session negotiation and configuration occur upon the next power up. For the change

to occur, the modem must be reset.

When the HDR session is negotiated, the session status is stored in NV RAM. Upon next

power up, if the session status is Active, the session parameters are not renegotiated,

unless a new network is acquired.

Example:

at!sessionstatus

HDR Session Status: 2

at!sessionstatus=00,00

at!sessionstatus?

HDR Session Status: 0

!SIPID= User ID Information for Simple IP Setup

Syntax: AT!SIPID=<user id>

Description: Sets the User ID information for a simple IP setup.

!SIPPWD= Password Information for Simple IP Setup

Syntax: AT!SIPPWD=<passwrd>

Description: Sets the password information for a simple IP setup.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 66 67

Sin comentarios

Multitech CDMA Guía de usuario Pagina 23