Multitech CDMA Guía de usuario Pagina 34
- Pagina / 67
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 6 – +C Prefix Commands
CDMA 1xEV-D0 AT Commands Reference Guide (Document S000482B) 34
+CQD= Command State Inactivity Timer
Syntax: AT+CQD=<n> (Sets the Command State Inactivity Timer)
AT+ CQD? (Reads the Command State Inactivity Timer)
Description: This timer determines when (or if) the modem will release a call if there is no activity on the
connection between the modem and the IWF, for the specified period. The entry
represents a multiple of five seconds. That is, each unit represents 5 seconds.
Value Meaning
0 Disables the timer
1–255 Indicates timer value in steps of five seconds.
The default value is 10 – meaning a timer setting of 50 seconds.
See also +CTA (Packet mode Inactivity Timer).
Note: This command is included for compatibility.
+CRC= Cellular Result Codes
Syntax: AT+CRC=<n> (Enables or disables cellular result codes)
AT+CRC? (Reads the cellular result code value)
Description: Enables or disables cellular result codes for call progress.
Value Meaning
0 Disables cellular result codes. Default.
1 Enables cellular result codes
The extended cellular result codes are in Extended Cellular Result Codes Table.
Extended cellular call progress codes are in the Extended Cellular Call Progress Codes
Table later in this manual.
+CRM= Local (Rm) Interface Protocol
Syntax: AT+CRM=<n> (Sets the Local Interface Protocol)
AT+CRM? (Reports the protocol for local (DCE - DTE) interface.
Description: Reports (or sets) the protocol for the local (DCE - DTE) interface. This value is set
automatically by the modem, based on the data received.
Value Meaning
0 Asynchronous Data or Fax
1 Packet data service, Relay Layer interface
2 Packet data service, Network Model (Default)
- CDMA 1xEV-D0 1
- Contents 3
- Chapter 1 – Introduction 7
- Modem Basics 8
- Host Connection Basics 9
- Conditions 10
- State Transitions 11
- Modem Buffers 11
- Command Handling 12
- Responses and Result Codes 13
- Result Code Framing 14
- Chapter 2 – Overview of 15
- Commands 15
- Account Activation Commands 17
- SMS Messages Commands 17
- !CNTSMS Count SMS 18
- !DASMS Delete All SMS 18
- !ECIO? Ec/Io 19
- !GMODE Mode of the Modem 19
- !GSMS? Get SMS 19
- !PREV? Protocol Revision 21
- !PRLVER? PRL Version 21
- !SSMS= Send SMS 24
- Channel Statistics on DRCs 25
- Statistics on CRCs 26
- !SUFWDRESET Resets Data 26
- Channel Statistics 27
- !SYSTIME? CDMA Time 27
- Chapter 4 – $ Prefix 28
- Currently Active Profile 29
- Chapter 5 – & Prefix 31
- Chapter 6 – +C Prefix 32
- +CFG= Configuration String 33
- +CHV Hang-up Voice 33
- +CMUX= Multiplex Option 33
- +CSQ? Signal Quality 35
- +CSS? Serving System 35
- +CXT= Cellular Extension 36
- Chapter 7 – +F Prefix 37
- Command 37
- Chapter 8 – +G Prefix 38
- +GMI Get Manufacturer 39
- +GMM Get Model Number 39
- +GOI Get ISO ID 40
- +GSN Get ESN 40
- Chapter 9 – +I Prefix 41
- Chapter 10 – +M Prefix 42
- +MV18R= V.18 Reporting 43
- +MV18S= V.18 Selection 43
- Chapter 11 – +W Prefix 44
- Chapter 12 – No Prefix 45
- D Dial 46
- E Echo 47
- H Hook Control 47
- M Mute (Speaker Control) 48
- O Online (Remote) 48
- P Pulse Dialing 48
- T Tone (Set DTMF Dialing) 49
- Z Profile Restore 50
- Chapter 13 – -Prefix 51
- -MICMUT= Microphone Mute 52
- -NAMLCK= NAM Lock 52
- -NAMVAL= NAM Values 53
- -RESET Soft Reset 53
- -SHTDWN Shutdown 53
- -TONDUR= Tone Duration 55
- -TONMUT= Tone Mute 55
- Table of S-Registers 56
- Chapter 15 – Result Codes 58
- Chapter 16 – Stored Profile 60
- Settings 60
- Appendix A – Working With 61
- Airlink Control 62
- Pass through and Reflection 63
- Closing the Airlink 63
- Appendix B – ASCII Table 64
- Appendix C – Acronyms and 65
- Definitions 65
Relacionado con productos y manuales para Redes Multitech CDMA
Redes Multitech MTR-C2 Especificaciones
(330 paginas)
(330 paginas)
Redes Multitech CDMA Guía de usuario
(249 paginas)
(249 paginas)
Redes Multitech MTCMR-H Especificaciones
(12 paginas)
(12 paginas)
Redes Multitech MTR-H5 Guía de usuario
(26 paginas)
(26 paginas)
Redes Multitech MT100A2W Especificaciones
(16 paginas)
(16 paginas)
Redes Multitech MULTIVOIP MVP-130FXS Guía de usuario
(120 paginas)
(120 paginas)
Redes Multitech MTCBA-C-N12 Manual de usuario
(43 paginas)
(43 paginas)
Redes Multitech MT5600SMI Especificaciones
(138 paginas)
(138 paginas)
Redes Multitech MTCBA-C-IP-N12 Manual de usuario
(17 paginas)
(17 paginas)
Redes Multitech FaxFinder FF240-IP Manual de usuario
(23 paginas)
(23 paginas)
Redes Multitech MVP810-AV Manual de usuario
(4 paginas)
(4 paginas)
Redes Multitech MTCBA-C-U-N2 Especificaciones
(308 paginas)
(308 paginas)
Redes Multitech MTCMR-H Especificaciones
(56 paginas)
(56 paginas)
Redes Multitech CDMA Especificaciones
(129 paginas)
(129 paginas)
Redes Multitech MT2834BA Manual de usuario
(7 paginas)
(7 paginas)
Redes Multitech ISIHP-2U El manual del propietario
(63 paginas)
(63 paginas)
Redes Multitech MT2834BL Especificaciones
(225 paginas)
(225 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales