Multitech CDMA Guía de usuario descargar pdf (Pagina 44)

Chapter 11 – +W Prefix Commands

CDMA 1xEV-D0 AT Commands Reference Guide (Document S000482B) 44

Chapter 11 – +W Prefix

Commands

+WGETWK Request Wake-Up Reason

Syntax: AT+ WGETWK

Description: Responds with the reason of the last wake-up event. The response is a decimal digit

representing the bit-mask below.

If no events have triggered, the response is a zero.

Value Meaning If Set to This Value

0 No event

1 Ring received

2 Radio coverage restored

2 SMS message received

+WWKUP= Wake-Up Events Mask

Syntax: AT+WWKUP=<n>

AT+WWKUP? (Reports the settings)

Description: Sets or reports the bit-mask used to identify events that generate a wake-up from the

modem to the host device. A setting of zero disables all wake-up signals. The default

setting is 5; wake on ring and SMS received.

When this command is issued, the last wake-up event reason (see +WGETWK on page

76) is reset to 0.

Bit Meaning when set 0 Wake-up on ring received (Default is set)

1 Wake-up on radio coverage restored (Default is clear)

2 Wake on SMS received (Default is set)

3 – 7 Reserved

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 66 67

Sin comentarios

Multitech CDMA Guía de usuario Pagina 44