Multitech CDMA Guía de usuario Pagina 43
- Pagina / 67
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 10 – +M Prefix Commands
CDMA 1xEV-D0 AT Commands Reference Guide (Document S000482B) 43
+MV18R= V.18 Reporting
Syntax: AT+MV18R=<n>
AT+MV18R? (Queries the settings)
Description: Enables or disables the extended result codes for +MV18R: from the IWF to the modem.
To query the IWF for confirmation that the command is supported, use +GCAP (Get
Capabilities). The +MV18S result must be in that response.
Value Meaning
0 Disables reporting of V.18 result codes. Default.
1 Enables reporting.
The possible intermediate result codes are:
+MV18: 5BIT Indicates connection with 5-bit (Baudot) mode
+MV18: EDT Indicates connection with EDT
+MV18: DTMF Indicates connection with DTMF
+MV18: V21 Indicates connection with V.21
+MV18: V23 Indicates connection with V.23
+MV18: B103 Indicates connection with Bell 103-type modulation
+MV18: V18 Indicates connection with V.18
+MV18S= V.18 Selection
Syntax: AT+MV18S=[m],[ans],[fb]
AT+MV18S? (Queries the settings)
Description: Controls the manner and operation of the V.18 capabilities in the IWF (if present in the
IWF).
To query the IWF for confirmation that the command is supported, use +GCAP (Get
Capabilities). The +MV18S result must be in that response.
Parm Value Meaning
m 0 Disable V.18 operation. Default.
1 V.18 operation, auto detect mode
2 V.18, connect in 5-bit (Baudot) mode
3 V.18, connect in DTMF mode
4 V.18, connect in EDT mode
5 V.18, connect in V.21 mode
6 V.18, connect in V.23 mode
7 V.18, connect in Bell 103-type mode
s 0 Disable V.18 answer operation. Default.
1 No default specified (auto-detect)
2 V.18 operation, connect in 5-bit (Baudot) mode
3 V.18, connect in DTMF mode
4 V.18, connect in EDT mode
fb 0 Disable fallback. Default.
1 Enable fallback to re-acquisition after 2 seconds of no transmission.
The default setting is +MV18S=0,0,0 – meaning V.18 operation is disabled.
- CDMA 1xEV-D0 1
- Contents 3
- Chapter 1 – Introduction 7
- Modem Basics 8
- Host Connection Basics 9
- Conditions 10
- State Transitions 11
- Modem Buffers 11
- Command Handling 12
- Responses and Result Codes 13
- Result Code Framing 14
- Chapter 2 – Overview of 15
- Commands 15
- Account Activation Commands 17
- SMS Messages Commands 17
- !CNTSMS Count SMS 18
- !DASMS Delete All SMS 18
- !ECIO? Ec/Io 19
- !GMODE Mode of the Modem 19
- !GSMS? Get SMS 19
- !PREV? Protocol Revision 21
- !PRLVER? PRL Version 21
- !SSMS= Send SMS 24
- Channel Statistics on DRCs 25
- Statistics on CRCs 26
- !SUFWDRESET Resets Data 26
- Channel Statistics 27
- !SYSTIME? CDMA Time 27
- Chapter 4 – $ Prefix 28
- Currently Active Profile 29
- Chapter 5 – & Prefix 31
- Chapter 6 – +C Prefix 32
- +CFG= Configuration String 33
- +CHV Hang-up Voice 33
- +CMUX= Multiplex Option 33
- +CSQ? Signal Quality 35
- +CSS? Serving System 35
- +CXT= Cellular Extension 36
- Chapter 7 – +F Prefix 37
- Command 37
- Chapter 8 – +G Prefix 38
- +GMI Get Manufacturer 39
- +GMM Get Model Number 39
- +GOI Get ISO ID 40
- +GSN Get ESN 40
- Chapter 9 – +I Prefix 41
- Chapter 10 – +M Prefix 42
- +MV18R= V.18 Reporting 43
- +MV18S= V.18 Selection 43
- Chapter 11 – +W Prefix 44
- Chapter 12 – No Prefix 45
- D Dial 46
- E Echo 47
- H Hook Control 47
- M Mute (Speaker Control) 48
- O Online (Remote) 48
- P Pulse Dialing 48
- T Tone (Set DTMF Dialing) 49
- Z Profile Restore 50
- Chapter 13 – -Prefix 51
- -MICMUT= Microphone Mute 52
- -NAMLCK= NAM Lock 52
- -NAMVAL= NAM Values 53
- -RESET Soft Reset 53
- -SHTDWN Shutdown 53
- -TONDUR= Tone Duration 55
- -TONMUT= Tone Mute 55
- Table of S-Registers 56
- Chapter 15 – Result Codes 58
- Chapter 16 – Stored Profile 60
- Settings 60
- Appendix A – Working With 61
- Airlink Control 62
- Pass through and Reflection 63
- Closing the Airlink 63
- Appendix B – ASCII Table 64
- Appendix C – Acronyms and 65
- Definitions 65
Relacionado con productos y manuales para Redes Multitech CDMA
Redes Multitech MTR-C2 Especificaciones
(330 paginas)
(330 paginas)
Redes Multitech CDMA Guía de usuario
(249 paginas)
(249 paginas)
Redes Multitech MTCMR-H Especificaciones
(12 paginas)
(12 paginas)
Redes Multitech MTR-H5 Guía de usuario
(26 paginas)
(26 paginas)
Redes Multitech MT100A2W Especificaciones
(16 paginas)
(16 paginas)
Redes Multitech MULTIVOIP MVP-130FXS Guía de usuario
(120 paginas)
(120 paginas)
Redes Multitech MTCBA-C-N12 Manual de usuario
(43 paginas)
(43 paginas)
Redes Multitech MT5600SMI Especificaciones
(138 paginas)
(138 paginas)
Redes Multitech MTCBA-C-IP-N12 Manual de usuario
(17 paginas)
(17 paginas)
Redes Multitech FaxFinder FF240-IP Manual de usuario
(23 paginas)
(23 paginas)
Redes Multitech MVP810-AV Manual de usuario
(4 paginas)
(4 paginas)
Redes Multitech MTCBA-C-U-N2 Especificaciones
(308 paginas)
(308 paginas)
Redes Multitech MTCMR-H Especificaciones
(56 paginas)
(56 paginas)
Redes Multitech CDMA Especificaciones
(129 paginas)
(129 paginas)
Redes Multitech MT2834BA Manual de usuario
(7 paginas)
(7 paginas)
Redes Multitech ISIHP-2U El manual del propietario
(63 paginas)
(63 paginas)
Redes Multitech MT2834BL Especificaciones
(225 paginas)
(225 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales