Multitech MVPGK1 Guía de usuario descargar pdf (Pagina 74)

MultiVOIP Gatekeeper User Guide 75

Appendix C - SBC Configuration Details

The recovery time is the length of time, measured in CPU clock periods, that the system will delay after

completing an input/output request. This delay occurs because the CPU operates much faster than the

input/output bus and, therefore, the CPU must be delayed to allow for the completion of the I/O.

This setting determines the recovery time allowed for 8 bit I/O. Choices are from 1 to 8 CPU clock

periods.

3 clock periods is the default setting.

16 Bit I/O Recovery Time

This setting determines the recovery time allowed for 16 bit I/O. Choices are from 1 to 4 CPU clock

periods.

2 clock periods is the default setting.

Memory Hole At 15M-16M

In order to improve performance, certain space in memory can be reserved for ISA cards. This

memory must be mapped into the memory space below 16 MB.

Enabled memory hole supported

Disabled memory hole not supported (default)

Power Management Setup

The Power Management Setup enables you to configure your system to save energy most effectively

while still meeting your computing needs. When you specify Max Saving, all power-saving timeouts

are set to their minimum value and power saving is implemented at the lowest possible threshold.

Esc: Quit

F1: Help

F5: Old Values

F6: Load BIOS Defaults

F7: Load Setup Defaults

Pu/Pd/+/-: Modify

(Shift) F2: Color

:SELECT ITEM

ROM / PCI / ISA BIOS (2A59FP6C)

POWER MANAGEMENT SETUP

AWARD SOFTWARE, INC.

Power Management :Disable

PM Control by APM :Yes

Video Off Method :V/H SYNC + Blank

MODEM Use IRQ :3

Doze Mode :Disable

Standby Mode :Disable

Suspend Mode :Disable

HDD Power-Down :Disable

**Wake Up Events in Doze & Standby **

IRQ3 (Wake-Up Event) :ON

IRQ4 (Wake-Up Event) :ON

IRQ8 (Wake-Up Event) :ON

IRQ12 (Wake-Up Event) :ON

** Power-Down & Resume Events **

IRQ3 (COM 2) :ON

IRQ4 (COM 1) :ON

IRQ5 (LPT 2) :ON

IRQ6 (Floppy Disk) :OFF

IRQ7 (LPT1) :ON

IRQ8 (RTC Alarm) :OFF

IRQ9 (IRQ2 Redir) :ON

IRQ10 (Reserved) :ON

IRQ11 (Reserved) :ON

IRQ12 (PS/2 Mouse) :ON

IRQ13 (Co-Processor) :ON

IRQ14 (Hard Disk) :ON

IRQ15 (Reserved) :ON

Figure C-8. Power Management Setup

Power Management

This field lets you select the type (or degree) of power saving used. There are four modes of power

management:

1. Doze Mode

2. Standby Mode

3. Suspend Mode

4. HDD Power Down

There are four selections for Power Management, three of which have fixed mode settings.

Disable (default) No power management. Disables all four modes.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 86 87

Comentarios a estos manuales

Sin comentarios

Multitech MVPGK1 Guía de usuario Pagina 74

Comentarios a estos manuales

Relacionado con productos y manuales para Los componentes del chasis Multitech MVPGK1