Multitech MVPGK1 Guía de usuario descargar pdf (Pagina 75)

76 MultiVOIP Gatekeeper User Guide

Min. Power Saving Minimum power management.

Doze Mode = 1hr.,

Standby Mode = 1 hr.,

Suspend Mode = 1hr., and

HDD Power Down = 15 min.

Max. Power Saving Maximum power management  ONLY AVAILABLE FOR SL CPUs.

Doze Mode = 1 min.,

Standby Mode = 1 min.,

Suspend Mode = 1 min., and

HDD Power Down = 1 min.

User Defined. Enables you to set each mode individually. When not disabled, each of the

ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges from 1 min. to

15 min. (HDD can also be disabled).

PM Control APM

When enabled ( YES ), an Advanced Power Management device will be activated to enhance the

Maximum Power Saving mode and to stop the CPU internal clock. The Advanced Power Management

function operates only if Maximum Power Saving is enabled. When enabled ( YES ), the system BIOS

will wait for APMs prompt before it enters any PM mode (Doze, Standby or Suspend). If APM is

installed, and if a task is running and the timer has timed out, APM will not prompt the BIOS to employ

any power saving mode.

Video Off Method

This determines how the monitor is blanked (V/H SYNC+Blank). This selection will cause the system

to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer (Blank

Screen). This option only writes blanks to the video buffer.

Note: Doze, Standby, and Suspend are configurable only when User Defined power management has been selected.

Doze Mode

This timeout setting determines how long the PC must be idle before entering Doze mode. Values

range from 10 seconds to 2 hours. Doze mode can also be disabled. In Doze mode, the CPU clock runs

at a slower speed while all other devices continue operating at full speed.

Standby Mode

This timeout setting determines how long the PC must be idle before entering Standby mode. Values

range from 30 seconds to 2 hours. Standby can also be disabled. When Standby mode is engaged, the

PCs hard drive and its video are turned off while all other devices continue operating at full speed.

Suspend Mode

This timeout setting determines how long the PC must be idle before entering Suspend mode. Values

range from 30 seconds to 2 hours. Suspend can also be disabled. In Suspend mode, all devices except

the CPU are shut off.

HDD Power Down

This timeout setting determines how long the PC must be idle before entering HDD Power Down mode.

In HDD Power Down mode, the hard disk drive will be shut off but all other devices remain active.

PnP/PCI Configuration

If you choose PNP/PCI CONFIGURATION from the CMOS Setup Utility menu, the following screen will

appear:

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 86 87

Comentarios a estos manuales

Sin comentarios

Multitech MVPGK1 Guía de usuario Pagina 75

Comentarios a estos manuales

Relacionado con productos y manuales para Los componentes del chasis Multitech MVPGK1