Multitech MR9600-100 Guía de usuario Pagina 63

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 62
6 Monitoring and Controlling Your System
55
Controlling Your System
MultiCommManager allows you to perform many actions on your systems modems. To perform
an action on one or more modems, first select the modems, then select a command.
Select a command by choosing a menu item or its corresponding toolbar button, if it has one.
When a command is selected, the current window is asked to give the command a list of its
currently selected modems so that the action can be performed on each one.
See also:
How to Select Modems on page 32.
Configuring Modems
See Configuring Your Modems on page 27 and How to Configure Modems on page 56.
Testing Modems
A variety of loopback tests can be performed on MultiModemManager legacy link modems in
answer and originate modes and at different speeds. These tests make sure that the DSP, the
processor, the RAM, and the ROM are all working for the selected modem and speed. They test ba-
sically all the hardware except the DAA (data access arrangement), which is the circuitry that
connects the modem to the phone line.
See also:
How To Test Modems on page 57.
Resetting Modems
You can reset a modem to clear it from a stuck state, to hang it up (though you should try
Control|Hangup Device first), or so that it can be flash programmed from the serial port (this
should also work without resetting the modem first). Modems can be reset directly by the system
manager or indirectly by letting the MultiCommManager reset modems in response to an
abnormal event (to see how to configure this, see Acting in Response to Faults).
See also: How To Reset Modems on page 57.
Vista de pagina 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 85 86

Comentarios a estos manuales

Sin comentarios