Multitech CDMA Guía de usuario Pagina 166

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 249
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 165
GPS AT COMMANDS SET
AT Commands for EV-DO-EV3 Modems
166
gpsOne Commands
Clear GPS Data $GPSCLRX
Execute command resets all GPS related parameters as follows:
GPS Almanac Data
GPS Ephemeris Data
LBS User Plane PDE IP Address
LBS User Plane PDE IP Port
Test command returns the OK result code.
Syntax
Command Command type
AT$GPSCLRX Execute
AT$GPSCLRX=? Test
Notes
This is a global command that cannot clear individual data.
Example
AT$GPSCLRX=?
OK
AT$GPSCLRX
OK
GPS Lock Mode $GPSLOCK
Execute command sets the lock mode to be used with GPS. Allows the user to turn on or off location messaging
(IS-801) to the network in modem.
Read command reports the current value of the <mode> parameter.
Test command reports the range of supported values for the parameter.
Syntax
Command Command type
AT$GPSLOCK=<mode> Execute
AT$GPSLOCK? Read
AT$GPSLOCK=? Test
Vista de pagina 165
1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 248 249

Comentarios a estos manuales

Sin comentarios