Multitech CDMA Guía de usuario descargar pdf (Pagina 189)

AUDIO COMMANDS

189 AT Commands for EV-DO-EV3 Modems

Parameters and Values

<mode> Ringing tone.

0 Disables open audio path. Default: 0.

1 Enables open audio path.

Notes

 This parameter is not saved in non-volatile memory.

Select Ringer Sound #SRS

Set command sets the ringer sound.

Read command reports current selected ringing and its status in the format:

#SRS: <n>,<tout>

where:

<n> Ringing tone number.

1-max

<n> Ringing status.

0 Selecting, but not playing.

1 Currently playing.

Test command reports the supported values for <n> and <tout>.

Syntax

Command Command type

AT#SRS=[<n>,<tout>] Set

AT#SRS? Read

AT#SRS=? Test

Parameters and Values

<n> Ringing tone number.

0 Current ringing tone.

1-32 Ringing tone number. Default: 10.

<tout> Ringing tone playing timeout in seconds.

0 Ringer is stopped (if present) and current ringer sound is set.

1-60 Ringer sound playing for <tout> seconds and, if <n> > 0, ringer sound <n> is set a s

default ringer sound.

Notes

 When the command is issued with <n> > 0 and <tout> > 0, the <n> ringing tone is played for <tout> seconds

and stored as default ringing tone.

 If command is issued with <n> > 0 and <tout> = 0, the playing of the ringing is stopped (if present) and <n>

ringing tone is set as current.

 If command is issued with <n> = 0 and <tout> > 0 then the current ringing tone is played for <tout> seconds.

 If both <n> and <tout> are 0 then the default ringing tone is set as current and ringing is stopped.

 If all parameters are omitted then the behavior of Set command is the same as Read command.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 248 249

Sin comentarios

Multitech CDMA Guía de usuario Pagina 189