Multitech CDMA Guía de usuario descargar pdf (Pagina 31)

V.250 AT COMMANDS

31 AT Commands for EV-DO-EV3 Modems

Parameters and Values

<n>

0-1 Profile number. The wireless module can store 2 full configurations. See &W.

Notes

 Different from command Z<n>, which loads the desired profile just once; the profile chosen through

command &P loads on every startup.

 If parameter is omitted, the command has the same behavior as AT&P0.

Store Current Configuration &W

Execute command stores the complete configuration of the device in profile <n>.

Syntax

Command Command type

AT&W[<n>] Execute

Parameters and Values

<n>

0-1 Profile.

Notes

 If parameter is omitted, the command behaves the same as AT&W0.

Store Telephone Number &Z

Execute command stores the telephone number <nr> in the record <n>. The records cannot be overwritten. You

must clear them before rewriting.

Syntax

Command Command type

AT&Z<n>=<nr> Execute

Parameters and Values

<n> Phonebook record, 0-9.

<nr> String type, telephone number.

Notes

 The wireless module has built-in, non-volatile memory where you can store 10 telephone numbers, each

with a maximum 24 digits.

 To delete the record <n>, issue the command AT&Z<n>=<CR>.

 Use the command &N to view the records in the module memory

 To dial the telephone number stored in the record use the command ATDS=<n>.

Example

Store the number to index 0:

AT&Z0=5554443333

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 248 249

Sin comentarios

Multitech CDMA Guía de usuario Pagina 31