Multitech CF220 Guía de usuario descargar pdf (Pagina 14)

Chapter 2: Sample System

Multi-Tech Systems, Inc. CF220-DID CallFinder User Guide 14

Step 3b Technical: Enter operating parameters of CallFinder channel (FXO)

Each of the CallFinder’s DID-channel modems has two user-specified parameters. You set them in the

CallFinder software.

Figure 2-7: Operating parameters

Technical Parameters Related to CallFinder’s Extension Port Line

Paramete

alues Comments

Extension Port FXO Use FXO whenever CallFinder channel connects to PBX station

port.

Auto Attendant Delay 1-5

(in seconds)

Describes how long the CallFinder waits before dialing.

Default = 2.

Note that values higher than 5 seconds can be entered, but these

higher values are likely to be considered excessive to the party

calling in and waiting to be connected to an extension. Also, a

value of 0 can be entered but should not be used because it may

cause the PBX to miss dialed digits.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Sin comentarios

Multitech CF220 Guía de usuario Pagina 14