Multitech CF220 Guía de usuario descargar pdf (Pagina 47)

Multi-Tech Systems, Inc. CF220-DID CallFinder User Guide 47

Chapter 5 – CallFinder Server

Operation

Front Panel LEDs

Label

Identifier

Name Description

General LEDs

PWR Power On if unit is powered on.

Status Status Flashing Green = unit is functioning properly

Solid Green = unit is having its software updated. DO NOT

DISCONNECT POWER if Status LED is solid green.

Off = system is booting or power is off

Ethernet LEDs

LNK Data Link Lit when packets are being transmitted by any device on the

Ethernet network (not necessarily by the CallFinder).

100 Data Rate Indicates speed of Ethernet connection. If lit, data rate is 100

Mb/sec; if not lit, data rate is 10 Mb/sec.

Channel 1 LED

Presents status of Channel 1.

TD Transmit Data Channel 1 is being configured.

RD Receive Data Channel 1 is reporting.

TR Terminal Ready When lit, channel 1 is ready to receive a call.

Lit when DTR to DID modem is high.

DID DID The telco central office is drawing power from the DID line

which means that a call is in progress.

Channel 2 LEDs

Presents status of channel 2.

TD Transmit Data Channel 2 is being configured.

RD Receive Data Channel 2 is reporting.

TR Terminal Ready When lit, channel 2 is ready to receive a call.

Lit when DTR to DID modem is high.

DID DID The telco central office is drawing power from the DID line

which means that a call is in progress.

Updating CallFinder Firmware

Successive editions of CallFinder server firmware will be issued over time. When issued, such updated

firmware files will be accessible on the Multi-Tech web site. However, updating is done by the Device

Manager software. To install updated firmware, see “Updating Firmware” in Chapter 6: Device Manager

Installation and Operation.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Sin comentarios

Multitech CF220 Guía de usuario Pagina 47