Multitech MTPSR1-202ST Guía de usuario descargar pdf (Pagina 67)

Appendixes

MTPSR1-202ST

Description: Use the !C0= command to select one of the seven network switch types supported

by the ProxyServer. The factory default setting is !C0=2 (NET3).

!C0=0 AT&T 5ESS

!C0=1 Northern Telecom DMS-100

!C0=2 Euro-ISDN NET3

!C0=3 1TR6

!C0=4 INS64

!C0=5 US NI-1

!C0=6 VN4

Command: !C6=n

Function: Data SPID

Values: n = 0–20-character string

Default: null string

Description: Use the !C6= command to specify the data service profile identifier (SPID) that the

ISDN service provider assigned at subscription time. The data SPID string can have up to 20 charac-

ters. This command is not used if the switch type is set to NET3.

*: For DMS-100 switches, any ASCII character except the underline (_) character is valid. For NI-1

and AT&T switches, only the digits 0–9 are valid.

Command:

*!C6=n

Function: Voice SPID

Values: n = 0- to 20-character string

Default: null string

Description: Use the

*!C6=

command to specify the voice service profile identifier (SPID) that the

ISDN service provider assigned at subscription time. The voice SPID string can have up to 20 char-

acters.

This command is not used if the switch type is set to NET3.

*: For DMS-100 switches, any ASCII character except the underline (_) character is valid. For NI-1

and AT&T switches, only the digits 0–9 are valid.

Command:

!D3=n

Function: SAPI-0 Data TEI

Values: n = 0–63, 240 (auto), 241 (disable)

Default:

!D3=240

(Auto TEI)

Description: Use the

!D3=

command to set the terminal endpoint identifier (TEI) for the data chan-

nel. A TEI is a number used by the central office switch to uniquely identify each device that is connect-

ed to the network. When it uses dynamic TEI assignments (auto TEI), the central office switch assigns a

TEI each time the TA connects to the network. However, the ISDN service provider may assign a

fixed TEI at subscription time, in which case you must configure the TA with the fixed TEI number. You

can also use the

!D3=

command to disable the data channel, which may be useful when multiple TAs

are attached to a network terminator bus.

!D3=0–63

Sets the TEI to a fixed value from 0 through 63

!D3=240

Sets the data channel for dynamic TEI negotiation

!D3=241

Disables TEI

Command:

*!D3=n

Function: SAPI-0 Voice TEI

Values: n = 0–63, 240 (auto), 241 (disable)

Default:

*!D3=240

(Auto TEI)

Description: Use the

*!D3=

command to set the ProxyServer’s terminal endpoint identifier (TEI)

for the voice channel. See the

!D3=

command description.

*!D3=0–63

Sets the TEI to a fixed value from 0 through 63

*!D3=240

Sets the voice channel for dynamic TEI negotiation (factory default)

*!D3=241

Disables TEI

Command:

Function: Display Network Configuration

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 103 104

Comentarios a estos manuales

Sin comentarios

Multitech MTPSR1-202ST Guía de usuario Pagina 67

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MTPSR1-202ST