Multitech MTPSR1-202ST Guía de usuario descargar pdf (Pagina 79)

Appendixes

MTPSR1-202ST

ends, normal DTR monitoring resumes (assuming DTR is being monitored -- &D1, &D2, or &D3). If

DTR drops during the delay period, the data call will not be disconnected.

S-Register:

S32

Function: Escape Sequence Timeout

Unit: 100 ms

Range: 0–255

Default: 20

Description:

S32

sets the time allowed in an escape sequence from the receipt of the

the receipt of the carriage return. If the

S32

time interval expires before you press ENTER, the es-

cape sequence ends. The default time is 2 seconds.

S-Register:

S50

Function: Caller Line ID “CLI”

Unit: Decimal ASCII code

Range: 0 or 1

Default: 1(enabled)

Description:

S50

sets whether the mechanism for identifying the two endpoints of a connection is

enabled or disabled. Since RING messages only appear for ISDN data calls, the CLI feature does

not define a means of conveying Calling Party information to the terminal for ISDN voice calls. The

CLI information is only included with the first RING message for a given incoming call, and appears

as follows:

RING

FM: 5552000 TO: 5551000

If the Calling Party Number information is not included in the incoming SETUP message, the RING

message appears as follows:

RING

TO: 5551000

If the Called Party Number information is not included in the incoming SETUP message, the RING

message will appear as follows:

RING

FM: 5552000

If neither the Called Party Number, nor the Calling Party Number is included in the incoming SETUP

message, the RING message will contain no additional information.

S-Register:

S52

Function: Auto-Protocol Detection

Unit: Decimal ASCII code

Range: 0 or 1

Default: 0

Description:

S52

sets whether the mechanism for identifying V.110, V.120, X.75, MLPPP, or

SoftBond operation is enabled or disabled. This is applicable for an ISDN data call; and once deter-

mined by the ProxyServer the protocol used by means of the information conveyed by the SETUP

message, then the indicated protocol is activated. The default setting is 0, which disables the Auto-

Protocol Detection function.

S-Register:

S53

Function: Maximum Frame Size (X.75)

Unit: Decimal ASCII code

S-Register:

S54

Function: Force 56 Kbps B-Channel Data Rate

Unit: Decimal ASCII code

Range: 56 (Kbps), or 64 (Kbps)

Default:64 (Kbps)

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 103 104

Comentarios a estos manuales

Sin comentarios

Multitech MTPSR1-202ST Guía de usuario Pagina 79

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MTPSR1-202ST