Multitech MTPSR1-202ST Guía de usuario descargar pdf (Pagina 78)

ProxyServer User Guide

MTPSR1-202ST

Description:

specifies the character used by the ProxyServer to escape from data mode and

return to command mode.

S-Register:

Function: Carriage Return Character

Unit: Decimal ASCII code

Range: 0–127

Default:13 (^M)

Description:

specifies the character used by the ProxyServer to indicate the end of a com-

mand line.

S-Register:

Function: Line Feed Character

Unit: Decimal ASCII code

Range: 0–127

Default: 10 (^J)

Description:

specifies the character used by the ProxyServer to indicate the end of a status

message.

S-Register:

Function: Backspace Character

Unit: Decimal ASCII code

Range: 0–32, 127

Default:8 (^H)

Description:

specifies the character used by the ProxyServer to delete the previous character

in the command line.

S-Register:

Function: Wait for Connection (Abort Timer)

Unit: 1 second

Range: 0–255

Default: 45

Description:

sets the Abort Timer delay time, which is the length of time the ProxyServer waits

for a connection after dialing. If no connection is established during the specified time, the ProxyServ-

er ends the call.

S-Register:

S10

Function: DCD Drop Time

Unit: 50 ms

Range: 0–254, 255

Default: 20

Description:

S10

sets the time after a carrier signal is lost before the ProxyServer disconnects.

(The

&C2

command must be in effect.) The default setting is one second. Maximum delay is 25.4 sec-

onds (

S10=254

). Set

S10

to 255 to cause the ProxyServer not to disconnect with loss of carrier.

S-Register:

S25

Function: DTR Drop Time

Unit: 100 ms

Range: 0, 1–255

Default: 5

Description:

S25

sets the time that DTR must remain low before the ProxyServer disconnects.

The

S25

unit value for 0 is 50 ms. For values from 1 through 255, the unit value is 100 ms.

S-Register:

S26

Function: Delay DTR Monitoring

Unit: 500 ms (0.5 second)

Range: 0 – 9999

Default:10 (5 seconds)

Description: After a synchronous, CLEAR data call is originated or answered, DTR signal moni-

toring is delayed for the number of half-second intervals indicated by

S26

. After the delay period

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 103 104

Comentarios a estos manuales

Sin comentarios

Multitech MTPSR1-202ST Guía de usuario Pagina 78

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MTPSR1-202ST