Multitech MTPSR1-202ST Guía de usuario descargar pdf (Pagina 68)

ProxyServer User Guide

MTPSR1-202ST

Values: n/a

Default: n/a

Description: Use the !L command to display the ProxyServer’s current DN, SPID, TEI, Data proto-

col, and switch type.

Displays the current network configuration

Command:

>Dn

Function: Embedded Protocol Analyzer

Values: 0, 1, 2, 3, 4, 98 or 99

Default: n/a

Description: The Embedded Protocol Analyzer records and analyzes various protocols on the B-

channel, D-channel and DTE-DCE interface. The Embedded Protocol Analyzer is useful as a diag-

nostic tool, in that essential data messages are displayed. This offers the ability to observe

interactive operations of the ProxyServer, Central Exchange, and remote communications equip-

ment.

>D0

Display B-channel traffic, decoded as V.120

>D1

Display D-channel traffic, decoding layers 2 and 3 (Q.921 and Q.931)

>D2

Display D-channel traffic, decoding layer 2 only (Q.921)

>D3

Display D-channel traffic, decoding layer 3 only (Q.931)

>D4

Display B-channel traffic, decoded as X.75

>D98

Disable Embedded Protocol Analyzer, buffered data unchanged

>D99

Enable Embedded Protocol Analyzer, clearing buffered data

Command:

!N1=n

Function: Data Directory Number (DN)

Values: n = 24-character string

Default: null string

Description: The

!N1

command sets the directory number (DN) for the data channel. The directory

number is a telephone number that is assigned to the ProxyServer at subscription time by the ISDN

service provider. The DN is a string of up to 24 characters; valid characters are 0–9, the * character,

and the # character.

!N1=n

Sets the DN for the data channel

Command:

*!N1=n

Function: Voice Directory Number (DN)

Values: n = 24-character string

Default: null string

Description: This command sets the directory number (DN) for the voice channel. See the

!N1=

com-

mand description.

*!N1=n

Sets the DN for the voice channel

Command:

!RXGn

Function: Receive Gain

Values: n = 0–10

Default:

!RXG6

(Medium volume)

Description: Use the

!RXG

command to control the speaker level of an analog telephone device

connected to the AUX port.

AT!RXG0

selects the lowest level,

AT!RXG10

selects the highest level,

and intermediate numbers select intermediate levels.

!RXG0

Lowest speaker volume through

!RXG10

Highest speaker volume

Command:

!TXGn

Function: Transmit Gain

Values: n = 0–4

Default:

!TXG0

(No amplification)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 103 104

Comentarios a estos manuales

Sin comentarios

Multitech MTPSR1-202ST Guía de usuario Pagina 68

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MTPSR1-202ST