Multitech MTS2BTA-R Manual de usuario descargar pdf (Pagina 15)

Chapter 2 – AT Commands

Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360H) 15

Set/Get Device Information Commands

Status Information can be obtained directly from the device. This information is important when managing a

connection list of devices in a local area and the current settings of the device.

SI Status Information

Gets specified status information from the LOCAL device.

Format: ATSI,<Status Request>

Parameters: Status Request: Integer 1 to 22

If "Set Using" field is listed, see listed AT command for more information on return

parameters.

1 GET BT ADDRESS

Return Parameters: <BT Address>

EXAMPLE:

TYPE: ATSI,1<cr>

REPLY: <cr_lf>OK<cr_lf>

<cr_lf>123456789012<cr_lf>

2 GET FRIENDLY NAME

Set Using: ATSN

Return Parameters: <Friendly Name>

EXAMPLE:

TYPE: ATSI,2<cr>

REPLY: <cr_lf>OK<cr_lf>

<cr_lf>SocketWireless<cr_lf>

3 GET CURRENT CONNECTION STATUS (CH00-CH03)

Return Parameters: <Connection Status>

Connection Status:

Single Connection Format: (Mode, Ch00 State)

MP Format: (Mode,Ch00 State,Ch01 State,Ch02 State,Ch03 State)

Repeater Format: (Mode,Slave-Ch00 State,Master-Ch01 State)

Modes: 0 = Slave

1 = Auto-Master

2 = Idle

3 = Slave Undiscoverable

5 = Repeater

6 = Mesh

States: 0 = Disconnected

1 = Connected

EXAMPLE:

TYPE: ATSI,3<cr>

REPLY: <cr_lf>OK<cr_lf>

<cr_lf>1,0,0,0,0<cr_lf>

Note: This command does not report the status of any FTP or OPP connections.

Use ATSI,22 to obtain FTP/OPP status.

4 GET SERVICE NAME

Set Using: ATSSN

Return Parameters: <Service Name>

EXAMPLE:

TYPE: ATSI,4<cr>

REPLY: <cr_lf>OK<cr_lf>

<cr_lf>COM0<cr_lf>

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Comentarios a estos manuales

Sin comentarios

Multitech MTS2BTA-R Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para No Multitech MTS2BTA-R