Multitech MTS2BTA-R Manual de usuario Pagina 38
- Pagina / 88
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 2 – AT Commands
Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360H) 38
MD Put Device into Data Mode
This command forces the device into Data Mode. In order for this to have an effect the device has to be
CONNECTED.
Format: ATMD
Return Parameters: If successful an “OK” is returned, or nothing will be returned if already
in data or fast data mode, and connected. A “NO CARRIER” occurs
when the Bluetooth connection has been lost.
EXAMPLE:
TYPE: ATMD<cr>
REPLY: <cr_lf>OK<cr_lf>
OR
<cr_lf>NO CARRIER<cr_lf>
MF Put Device into Fast Data Mode
This command forces the radio into Fast Data Mode on channel 00 only. In order for this to have an
effect, the device has to be CONNECTED. Once in Fast Data Mode, all commands are treated as
data. Ways to get out of this mode are to reset power on the radio or strobe PIO(4) while connected.
Format: ATMF
Return Parameters: If successful an “OK” is returned, or nothing will be returned if already
in data or fast data mode, and connected. A “NO CARRIER” occurs
when the Bluetooth connection has been lost.
EXAMPLE:
TYPE: ATMF<cr>
REPLY: <cr_lf>OK<cr_lf>
OR
<cr_lf>ERROR<cr_lf>
OR
<cr_lf>NO CARRIER<cr_lf>
Note: Strobe PIO(4) >5ms to take the device out of fast data into command mode and
maintain the Bluetooth RF connection. If not RF connected, the device will be placed in
command mode.
Utilities – Cancel Command
UCL Cancel
The UCL command tells the radio to cancel inquiry or connect request commands and then place the
radio in Idle Mode. This command can come in handy for a quick exit from commands like inquiry
mode if there are no devices in the area and you do not want to wait for an automatic timeout. You
can not issue a cancel command while RF connected.
This command can also be used to break out of the auto-master connect mode. If executed while
connected in this mode, the radio will disconnect and enter idle mode instead of attempting to
connect again.
Format: ATUCL
EXAMPLE:
TYPE: ATUCL<cr>
REPLY: <cr_lf>OK<cr_lf>
OR
<cr_lf>ERROR<cr_lf>
- AT Commands 1
- Reference Guide 1
- Table of Contents 3
- Chapter 1 – Introduction 5
- Changing Configuration 6
- Using Multi-Point Mode 8
- Multipoint Examples 9
- Multi-Point Test Scenarios 10
- Repeater Mode 12
- Chapter 2 - AT Commands 13
- URST Reset 14
- FRST Factory Reset 14
- SI Status Information 15
- Security Commands 19
- Set and Read Device Name 20
- RSN Read Service Name 21
- SP Set PIN 22
- OP Overwrite PIN 23
- Configuration Commands 24
- SW22 Write PIO Direction 26
- SW23 Write PIO Level 27
- SW26 Lock User Settings 29
- SW27 Write LED Rate 29
- SW29 Write PIN Lock Mode 30
- SW30 Write Deep Sleep Mode 30
- Inquiry Commands 31
- Connect as Master Commands 32
- DC Dial Channel 33
- DL Dial Last 34
- LAST Read Last Address 34
- MACLR Master Address Clear 35
- Connect As Slave Command 36
- Disconnect Commands 36
- About Command/Data Mode 37
- Data Mode Commands 37
- Utilities – Cancel Command 38
- Pairing Commands 39
- Low Power Modes Using Sniff 40
- SNIFF Enable Sniff 40
- SSNIFF Enable Auto Sniff 41
- CSNIFF Clear Sniff 41
- XSNIFF Exit Sniff Mode 41
- PARK Enable Park 42
- XPARK Exit Park 42
- Golden Receive Power Range 42
- RSSI Get RSSI Value 42
- LQ Get Link Quality 43
- Max Power Command 44
- Variable Storage Commands 45
- PIO Logic Commands 46
- Commands 47
- FTP Client 48
- DHFTP Dial Hang Up FTP 49
- FTPB FTP Browse 49
- FTP Push/Pull Commands 51
- FTP Server 52
- DOPP Dial OPP 53
- DHOPP Dial Hang Up OPP 53
- OPP Push/Pull Commands 54
- Chapter 4 – Examples 59
- From Power Up 60
- Headset Point-to-Point 60
- Headset Multipoint 60
- Example Client Applications 61
- Description Requires 69
- Appendix B – Responses 72
- Appendix C -- UUID Table 79
- Consumption 80
- Command Responses Comparison 81
- Abbreviations 85
Relacionado con productos y manuales para No Multitech MTS2BTA-R
No Multitech ISI551PC El manual del propietario
(31 paginas)
(31 paginas)
No Multitech MTS2BTA-R Especificaciones
(12 paginas)
(12 paginas)
No Multitech ISI552PC El manual del propietario
(28 paginas)
(28 paginas)
No Multitech MR4800E Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.211 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales