Multitech MTS2BTA-R Manual de usuario Pagina 25
- Pagina / 88
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 2 – AT Commands
Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360H) 25
SW21 Write Slave Scan Intervals and Windows
This command configures the page scan, inquiry scan interval, and window for disconnected
slave devices in time slots.
Warning – Setting these will affect the inquiry and connection time. You could inadvertently set
the scan interval too long and the window to short on the slave for a master connect request.
Unless your application is battery powered slave and power conservation is critical leave at the
factory default settings. The minimum Window allowed by the Bluetooth spec is 11.25msec. If
you set isWindow = 0 the Slave device will not be discovered by any Master but you can still
use the Slaves BT address and connect directly to it from a remote Master.
Format: ATSW21,<psInterval>,<psWindow>,<isInterval>,<isWindow>
Parameters:
• psInterval: Page Scan Interval
Integer Value 18 to 4096 (11.25ms to 2560ms), 0=Disabled
Time [ms] = psInterval * 0.625ms
• psWindow: Page Scan Window
Integer Value 18 to 4096 (11.25ms to 2560ms), 0=Disabled
Time [ms] = psWindow * 0.625ms
• isInterval: Inquiry Scan Interval
Integer Value 18 to 4096 (11.25ms to 2560ms), 0=Disabled
Time [ms] = isInterval * 0.625ms
• isWindow: Inquiry Scan Window
Integer Value 18 to 4096 (11.25ms to 2560ms), 0=Disabled
Time [ms] = isWindow * 0.625ms
Factory Default: psInterval = 1024(640ms), psWindow = 512(320ms), isInterval =
1024(640ms), isWindow = 512(320ms)
EXAMPLE:
TYPE: ATSW21,4096,18,4096,18<cr>
REPLY: <cr_lf>OK<cr_lf>
OR
<cr_lf>ERROR<cr_lf>
Read Using: ATSI,10
Notes:
• Requires a reset for the settings to go into affect.
• ATSW21,4096,18,4096,18 settings will result in a current draw for an unconnected
slave of ~1mA average vs. 39mA average at default.
• ATSW21,4096,18,4096,18 settings along with enabling Deep Sleep Mode will result in
an unconnected slave current draw of ≈ 350uA average.
- AT Commands 1
- Reference Guide 1
- Table of Contents 3
- Chapter 1 – Introduction 5
- Changing Configuration 6
- Using Multi-Point Mode 8
- Multipoint Examples 9
- Multi-Point Test Scenarios 10
- Repeater Mode 12
- Chapter 2 - AT Commands 13
- URST Reset 14
- FRST Factory Reset 14
- SI Status Information 15
- Security Commands 19
- Set and Read Device Name 20
- RSN Read Service Name 21
- SP Set PIN 22
- OP Overwrite PIN 23
- Configuration Commands 24
- SW22 Write PIO Direction 26
- SW23 Write PIO Level 27
- SW26 Lock User Settings 29
- SW27 Write LED Rate 29
- SW29 Write PIN Lock Mode 30
- SW30 Write Deep Sleep Mode 30
- Inquiry Commands 31
- Connect as Master Commands 32
- DC Dial Channel 33
- DL Dial Last 34
- LAST Read Last Address 34
- MACLR Master Address Clear 35
- Connect As Slave Command 36
- Disconnect Commands 36
- About Command/Data Mode 37
- Data Mode Commands 37
- Utilities – Cancel Command 38
- Pairing Commands 39
- Low Power Modes Using Sniff 40
- SNIFF Enable Sniff 40
- SSNIFF Enable Auto Sniff 41
- CSNIFF Clear Sniff 41
- XSNIFF Exit Sniff Mode 41
- PARK Enable Park 42
- XPARK Exit Park 42
- Golden Receive Power Range 42
- RSSI Get RSSI Value 42
- LQ Get Link Quality 43
- Max Power Command 44
- Variable Storage Commands 45
- PIO Logic Commands 46
- Commands 47
- FTP Client 48
- DHFTP Dial Hang Up FTP 49
- FTPB FTP Browse 49
- FTP Push/Pull Commands 51
- FTP Server 52
- DOPP Dial OPP 53
- DHOPP Dial Hang Up OPP 53
- OPP Push/Pull Commands 54
- Chapter 4 – Examples 59
- From Power Up 60
- Headset Point-to-Point 60
- Headset Multipoint 60
- Example Client Applications 61
- Description Requires 69
- Appendix B – Responses 72
- Appendix C -- UUID Table 79
- Consumption 80
- Command Responses Comparison 81
- Abbreviations 85
Relacionado con productos y manuales para No Multitech MTS2BTA-R
No Multitech ISI551PC El manual del propietario
(31 paginas)
(31 paginas)
No Multitech MTS2BTA-R Especificaciones
(12 paginas)
(12 paginas)
No Multitech ISI552PC El manual del propietario
(28 paginas)
(28 paginas)
No Multitech MR4800E Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales