Multitech MTS2BTA-R Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Chapter 1 – Introduction
Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360H) 7
Important Notes – Please Read Prior to Continuing
Audio is currently supported on Channel 0 only.
The Bluetooth radio’s reset logic is active LOW for BT ver 2.0 modules.
Unlike the old firmware the new parser design will not accept line feed <lf> after issuing a valid AT
Command only a carriage return <cr> shall be used.
To provide the best firmware architecture, design, and future profile support there is not 100% code
backwards compatibility in regards to certain AT Commands and responses. This release firmware is
targeted to CSR BC04 platforms. The firmware was developed and tested on BC02 and BC04 platforms.
The ATDI command response string no longer returns radio name. There is a separate command to
request a remote device name based on CSR’s newest design implementation.
Overall performance improvements from ver 1.2 to ver 2.0:
Data throughput for a single point-to-point connection is equal or better than (250Kbps) in fast
data mode. While in regular data mode (AT Command parser running) it is only 35Kbps.
Current consumption is 15% less.
Inquiry responses are much faster.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 87 88

Comentarios a estos manuales

Sin comentarios