Multitech MTS2BTA-R Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Chapter 2 – AT Commands
Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360H) 23
OP Overwrite PIN
Overwrites the stored PIN without needing the old PIN. To use this command, the PIN must be
unlocked using ATSW29.
Format: ATOP,<PIN>
Parameters: PIN: 16 alphanumeric characters MAX (Caps sensitive, includes spaces)
Example:
TYPE: ATOP,1234<cr>
REPLY: <cr_lf>OK<cr_lf>
OR
<cr_lf>ERROR<cr_lf> //If ATOP has not been enabled with ATSW29.
PR Respond to Manual PIN Request
Allows the user to manually enter a PIN after receiving the PIN REQUEST prompt from the
device.
Format: ATPR,<PIN>
Parameters:
PIN: 16 alphanumeric characters MAX (Caps Sensitive, includes spaces)
EXAMPLE:
REPLY: <cr_lf>PIN REQUEST<cr_lf>
TYPE: ATPR,default<cr>
REPLY: <cr_lf>OK<cr_lf>
OR
<cr_lf>ERROR<cr_lf>
Class of Device (COD) Commands
SC Set Class of Device (COD)
Sets the COD.
Format: ATSC,<COD>
Parameters: A Class of Device (COD) requires exactly eight 16-bit hex values (0 thru F)
based on the Bluetooth COD specification names published and maintained by
the Bluetooth SIG.
Factory Default: 00000000 – Which is undefined since this is set by the user based on the
final OEM device it is installed in.
EXAMPLE:
TYPE: ATSC,00020114<cr>
REPLY: <cr_lf>OK<cr_lf>
OR
<cr_lf>ERROR<cr_lf>
Read Using: ATSI,5
Note: Requires a reset for change to take effect.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 87 88

Comentarios a estos manuales

Sin comentarios