Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 21)

Part 1 – AT Commands for All Universal IP Devices

Universal IP AT Commands Reference Guide 21

#RECiADD – Set Email Address

Description: To send email messages, the TCP/IP stack software must know the e-mail address of the

recipient. This email address will appear in the email header sent by the TCP/IP stack software,

in the field ‘To:‘

The RECi parameter can hold a maximum of 10 email addresses, each email address being at the

most 120 characters long.

This command overwrites all previously set email addresses of the RECi parameter.

If more than ten addresses are entered, the 11th and subsequent addresses until the end

character will be ignored.

Syntax: AT#RECi="<Value>"

AT#RECi? (replace i with 1, 2, or 3) or AT#VMAILi, AT#VALL

Values: RECi (i = 1, 2, or 3)

Alphanumeric ASCII text string up to 120 characters. The address must be provided in literal

format (for instance xxxxx@company.com).

Setting One Email Address / Resetting the Parameter / Getting:

Set value / reset the parameter: AT#RECi="<Value>" (replace i with 1, 2, or 3)

View value: AT#REC? (replace i with 1, 2, or 3) or AT#VMAILi, AT#VALL

Setting One to Ten Email Address to the RECi Parameter / Resetting the Parameter:

To set 1 to 10 email addresses to the RECi parameter, enter the AT#RECiADD<CR> overwriting

command.

Each email address has to be an alphanumeric ASCII text string, in literal format (for instance,

dev12345678@web.xyz). To add another email address, enter the <CR><LF> pair. To end the

setting, enter the following character: 1A (in ASCII code), generated in a keyboard by CTRL+Z

escape sequence.

Default: No default.

Example: AT#REC1ADD<CR>

<CTRL+Z>

#SUBJi – Set Email Pre-Defined Subject Text

Description: These parameters contain the pre-defined subject text that will be used by the TCP/IP stack to

compose the email header.

Syntax: AT#SUBJi="<value>" (replace i with 1, 2, or 3)

AT#SUBJi? (replace i with 1, 2, or 3) or AT#VMAILi, AT#VALL

Values: Alphanumeric ASCII text string up to 120 characters.

Default: No default.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 21